China · GB
20
GB/T 32958:2016 — Stainless steel clad pipes for fluid transport
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.17 | 0.23 | ||
| Cr | 0.25 | |||
| Cu | 0.25 | Copper in steel for hot working shall not exceed 0.20% | ||
| Mn | 0.35 | 0.65 | ||
| Ni | 0.3 | |||
| P | 0.035 | |||
| S | 0.035 | |||
| Si | 0.17 | 0.37 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| steel tubes | ≥235 | ≥390 | ||||
| steel tubes, d <= 168.3mm | ≥19 | |||||
| steel tubes, d > 168.3mm | ≥19 |