China · GB
20
GB/T 17107:1997 — Structural steel grades and mechanical property for forgings
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.17 | 0.24 | ||
| Cr | 0.25 | |||
| Cu | 0.25 | |||
| Mn | 0.35 | 0.65 | ||
| Ni | 0.25 | |||
| P | 0.035 | |||
| S | 0.035 | |||
| Si | 0.17 | 0.37 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| forgings, <= 100 mm, normalized and tempered | ≥50 Longitudinal | |||||
| forgings, > 100 <= 250 mm, normalized and tempered | ≥45 Longitudinal | |||||
| forgings > 250 <= 500 mm, normalized and tempered | ≥40 Longitudinal | |||||
| forgings > 500 <= 1000 mm, normalized and tempered | ≥35 Longitudinal | |||||
| forgings, normalized and tempered, <= 100 mm | ≥215 Longitudinal | ≥340 Longitudinal | ≥24 Longitudinal | ≥43 Charpy U Notch (20°C) | HB 103–156 Longitudinal | |
| forgings, normalized and tempered, > 100 <= 250 mm | ≥195 Longitudinal | ≥330 Longitudinal | ≥23 Longitudinal | ≥39 Charpy U Notch (20°C) | HB 103–156 Longitudinal | |
| forgings, normalized and tempered, > 250 <= 500 mm | ≥185 Longitudinal | ≥320 Longitudinal | ≥22 Longitudinal | ≥39 Charpy U Notch (20°C) | HB 103–156 Longitudinal | |
| forgings, normalized and tempered, > 500 <= 1000 mm | ≥175 Longitudinal | ≥300 Longitudinal | ≥20 Longitudinal | ≥35 Charpy U Notch (20°C) | HB 103–156 Longitudinal |