United Kingdom · B.S.
1.4563
BS EN 10088-2 — Stainless steels.Part 2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.02 | |||
| Cr | 26 | 28 | ||
| Cu | 0.7 | 1.5 | ||
| Mn | 2 | |||
| Mo | 3 | 4 | ||
| N | 0.11 | |||
| Ni | 30 | 32 | ||
| P | 0.03 | |||
| S | 0.01 | |||
| Si | 0.7 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| hot-rolled heavy plate +AT, <= 75 mm | ≥220 | 500–700 | ≥40 For t < 3 mm | ≥60 KV (ISO-V);≥90 KV (ISO-V) |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 195.00 | 12.00 | 450.00 | 1.00 | 8.00 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
High/low temperature
| Condition | Temperature ℃ | max |
|---|---|---|
| heavy plates | sheets | 550 |
| heavy plates | sheets | 500 |
| heavy plates | sheets | 450 |
| heavy plates | sheets | 400 |
| heavy plates | sheets | 350 |
| heavy plates | sheets | 300 |
| heavy plates | sheets | 250 |
| heavy plates | sheets | 200 |
| heavy plates | sheets | 150 |
| heavy plates | sheets | 100 |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.4563 | UNI | |
| X 1 NiCrMoCu 31 27 4 | UNI | |
| 1.4563 | UNE | |
| X 1 NiCrMoCu 31 27 4 | UNE | |
| 1.4563 | STAS | |
| X 1 NiCrMoCu 31 27 4 | STAS | |
| 1.4563 | SS | |
| X 1 NiCrMoCu 31 27 4 | SS | |
| 1.4563 | SNV | |
| X 1 NiCrMoCu 31 27 4 | SNV | |
| 1.4563 | SFS | |
| X 1 NiCrMoCu 31 27 4 | SFS | |
| 1.4563 | PN | |
| X 1 NiCrMoCu 31 27 4 | PN | |
| 1.4563 | ONORM | |
| X 1 NiCrMoCu 31 27 4 | ONORM | |
| 1.4563 | NS | |
| X 1 NiCrMoCu 31 27 4 | NS | |
| 1.4563 | NBN | |
| X 1 NiCrMoCu 31 27 4 | NBN | |
| 1.4563 | MSZ | |
| X 1 NiCrMoCu 31 27 4 | MSZ | |
| 1.4563 | Czech Republic | CSN |
| X 1 NiCrMoCu 31 27 4 | Czech Republic | CSN |
| 1.4563 | Bulgaria | BDS |
| X 1 NiCrMoCu 31 27 4 | Bulgaria | BDS |
| X 1 NiCrMoCu 31 27 4 | B.S. | |
| 1.4563 | AFNOR NF | |
| X 1 NiCrMoCu 31 27 4 | AFNOR NF | |
| X 1 NiCrMoCu 31 27 4 | DIN | |
| 1.4563 | DIN |