Czech Republic · CSN
X 2 CrNi 18 9
CSN EN 10297-2:2005 — Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureCreep properties
- 10000.0h
- 100000.0h
Temperature °C · time at rupture
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.03 | |||
| Cr | 17.5 | 19.5 | ||
| Mn | 2 | |||
| N | 0.11 | |||
| Ni | 8 | 10.5 | ||
| P | 0.045 | |||
| S | 0.015 | |||
| Si | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Seamless tubes, Solution annealed | ≥180 | ≥460 | ≥40 For long. direction |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 200.00 | 15.00 | 500.00 | 0.73 | 7.90 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
Creep
| Temperature ℃ | Time h | CRS |
|---|---|---|
| 550 | 10000.0h | 156.0 |
| 550 | 100000.0h | 92.0 |
| 560 | 10000.0h | 138.0 |
| 560 | 100000.0h | 85.0 |
| 570 | 10000.0h | 124.0 |
| 570 | 100000.0h | 78.0 |
| 580 | 10000.0h | 113.0 |
| 580 | 100000.0h | 72.0 |
| 590 | 10000.0h | 104.0 |
| 590 | 100000.0h | 65.0 |
| 600 | 10000.0h | 97.0 |
| 600 | 100000.0h | 59.0 |
| 610 | 10000.0h | 90.0 |
| 610 | 100000.0h | 54.0 |
| 620 | 10000.0h | 83.0 |
| 620 | 100000.0h | 49.0 |
| 630 | 10000.0h | 76.0 |
| 630 | 100000.0h | 45.0 |
| 640 | 10000.0h | 70.0 |
| 640 | 100000.0h | 40.0 |
| 650 | 10000.0h | 64.0 |
| 650 | 100000.0h | 36.0 |
| 660 | 10000.0h | 59.0 |
| 660 | 100000.0h | 32.0 |
| 670 | 10000.0h | 54.0 |
| 670 | 100000.0h | 28.0 |
| 680 | 10000.0h | 49.0 |
| 680 | 100000.0h | 25.0 |
| 690 | 10000.0h | 43.0 |
| 690 | 100000.0h | 21.0 |
| 700 | 10000.0h | 38.0 |
| 700 | 100000.0h | 18.0 |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.4307 | UNI | |
| X 2 CrNi 18 9 | UNI | |
| 1.4307 | UNE | |
| X 2 CrNi 18 9 | UNE | |
| 1.4307 | STAS | |
| X 2 CrNi 18 9 | STAS | |
| 1.4307 | SS | |
| X 2 CrNi 18 9 | SS | |
| 1.4307 | SNV | |
| X 2 CrNi 18 9 | SNV | |
| 1.4307 | SFS | |
| X 2 CrNi 18 9 | SFS | |
| 1.4307 | PN | |
| X 2 CrNi 18 9 | PN | |
| 1.4307 | ONORM | |
| X 2 CrNi 18 9 | ONORM | |
| 1.4307 | NS | |
| X 2 CrNi 18 9 | NS | |
| 1.4307 | NBN | |
| X 2 CrNi 18 9 | NBN | |
| 1.4307 | MSZ | |
| X 2 CrNi 18 9 | MSZ | |
| 1.4307 | Czech Republic | CSN |
| 1.4307 | Bulgaria | BDS |
| X 2 CrNi 18 9 | Bulgaria | BDS |
| 1.4307 | B.S. | |
| X 2 CrNi 18 9 | B.S. | |
| 1.4307 | AFNOR NF | |
| X 2 CrNi 18 9 | AFNOR NF | |
| X 2 CrNi 18 9 | DIN | |
| 1.4307 | DIN |