Czech Republic · CSN

X 2 CrNi 18 9

CSN EN 10216-5:2004 — CSN EN 10216-5

Chemical composition

wt% · log scale
0.0010.010.1110100C0.03Cr17.5 – 19.5Mn2N0.11Ni8 – 10.5P0.04S0.015Si1
  • min – max range
  • typical value

Mechanical properties

value range by condition
Impact energy Kv/Ku≥60 JSeamless tubes +ATYield strength Rp0.2≥180 MPaTensile strength Rm460–680 MPaImpact energy Kv/Ku≥100 JElongation A≥40 %Seamless tubes +AT, t <= 60 mm

High / low temperature

value vs. temperature
69.896.112314917550100150200250300350400450500550°C
  • Seamless tubes solution annealed +AT <= 60 mm · Yield strength Rp0.2

Physical properties

vs. temperature
Elastic modulus GPa
165 – 200°C
Mean thermal expansion 10⁻⁶/K
16.0 – 18.0°C

Creep properties

1.4444.287.0130173550560570580590600610620630640650660670680690700MPa
  • 10000.0h
  • 100000.0h

Temperature °C · time at rupture

Chemical composition

ElementminmaxSimilarRemarks
C0.03
Cr17.519.5
Mn2
N0.11
Ni810.5
P0.04
S0.015
Si1

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
Seamless tubes +AT≥60 Charpy V Notch (-196°C)
Seamless tubes +AT, t <= 60 mm≥180460–680≥40 long. test≥100 Charpy V Notch (20°C)

Physical properties

20.0

Elastic modulusMean thermal expansionThermal conductivitySpecific heatResistivityDensityPoisson's ratio
200.0015.00500.000.737.90

Typical physical values

DensityElastic modulusPoisson's ratioRemarks
7.61–8.10190.00–215.000.27–0.30Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design.
7.86190.00–210.000.27–0.30Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design.

High/low temperature

Yield strength Rp0.2 (MPa)
ConditionTemperature ℃Approx.
Seamless tubes solution annealed +AT <= 60 mm55080
Seamless tubes solution annealed +AT <= 60 mm50081
Seamless tubes solution annealed +AT <= 60 mm45085
Seamless tubes solution annealed +AT <= 60 mm40089
Seamless tubes solution annealed +AT <= 60 mm35094
Seamless tubes solution annealed +AT <= 60 mm300100
Seamless tubes solution annealed +AT <= 60 mm250108
Seamless tubes solution annealed +AT <= 60 mm200118
Seamless tubes solution annealed +AT <= 60 mm150130
Seamless tubes solution annealed +AT <= 60 mm100145
Seamless tubes solution annealed +AT <= 60 mm50165
Impact energy Kv/Ku (J)
ConditionTemperature ℃minRemarks
Seamless tubes solution annealed +AT-19660Charpy V Notch

Creep

Temperature ℃Time hCRS
55010000.0h156.0
550100000.0h92.0
56010000.0h138.0
560100000.0h85.0
57010000.0h124.0
570100000.0h78.0
58010000.0h113.0
580100000.0h72.0
59010000.0h104.0
590100000.0h65.0
60010000.0h97.0
600100000.0h59.0
61010000.0h90.0
610100000.0h54.0
62010000.0h83.0
620100000.0h49.0
63010000.0h76.0
630100000.0h45.0
64010000.0h70.0
640100000.0h40.0
65010000.0h64.0
650100000.0h36.0
66010000.0h59.0
660100000.0h32.0
67010000.0h54.0
670100000.0h28.0
68010000.0h49.0
680100000.0h25.0
69010000.0h43.0
690100000.0h21.0
70010000.0h38.0
700100000.0h18.0

Similar grades

GradeRegionSystem
1.4307ItalyUNI
X 2 CrNi 18 9ItalyUNI
1.4307SpainUNE
X 2 CrNi 18 9SpainUNE
1.4307RomaniaSTAS
X 2 CrNi 18 9RomaniaSTAS
1.4307SwedenSS
X 2 CrNi 18 9SwedenSS
1.4307SwitzerlandSNV
X 2 CrNi 18 9SwitzerlandSNV
1.4307FinlandSFS
X 2 CrNi 18 9FinlandSFS
1.4307PolandPN
X 2 CrNi 18 9PolandPN
1.4307AustriaONORM
X 2 CrNi 18 9AustriaONORM
1.4307NorwayNS
X 2 CrNi 18 9NorwayNS
1.4307BelgiumNBN
X 2 CrNi 18 9BelgiumNBN
1.4307HungaryMSZ
X 2 CrNi 18 9HungaryMSZ
1.4307Czech RepublicCSN
1.4307BulgariaBDS
X 2 CrNi 18 9BulgariaBDS
1.4307United KingdomB.S.
X 2 CrNi 18 9United KingdomB.S.
1.4307FranceAFNOR NF
X 2 CrNi 18 9FranceAFNOR NF
X 2 CrNi 18 9GermanyDIN
1.4307GermanyDIN