United Kingdom · B.S.
X 30 Cr 13
BS EN 10250-4 — Open steel die forgings for general engineering purposes.Part 4:Stainless steels
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.26 | 0.35 | ||
| Cr | 12 | 14 | ||
| Mn | 1.5 | |||
| P | 0.04 | |||
| S | 0.03 | For products to be machined a controlled sulfur content of 0 | ||
| Si | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| die forgings, forgings +QT850, <= 160 mm, forged bars | 650 | 850 1000.00 | 10 | |||
| die forgings, bars, forgings, annealed | 800.00 | |||||
| die forgings, HB, forgings, annealed | Forged bar 245.00 |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 215.00;210.00;220.00 | 30.00 | 460.00 | 0.60 | 7.70 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.72–8.00 | 190.00–210.00 | 0.27–0.30 | Typical property values for tool steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | CCT modified |
| Heat-treatment curve | Hardness-Tempering |
| Heat-treatment curve | CCT |
| Heat-treatment curve | TTT |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.4028 | UNI | |
| 1.4028 | UNE | |
| X 30 Cr 13 | UNE | |
| 1.4028 | STAS | |
| X 30 Cr 13 | STAS | |
| 1.4028 | SS | |
| X 30 Cr 13 | SS | |
| 1.4028 | SNV | |
| X 30 Cr 13 | SNV | |
| 1.4028 | SFS | |
| X 30 Cr 13 | SFS | |
| 1.4028 | PN | |
| X 30 Cr 13 | PN | |
| 1.4028 | ONORM | |
| X 30 Cr 13 | ONORM | |
| 1.4028 | NS | |
| X 30 Cr 13 | NS | |
| 1.4028 | NBN | |
| X 30 Cr 13 | NBN | |
| 1.4028 | MSZ | |
| X 30 Cr 13 | MSZ | |
| 1.4028 | Czech Republic | CSN |
| X 30 Cr 13 | Czech Republic | CSN |
| 1.4028 | Bulgaria | BDS |
| X 30 Cr 13 | Bulgaria | BDS |
| 1.4028 | B.S. | |
| 1.4028 | AFNOR NF | |
| X 30 Cr 13 | UNI | |
| X 30 Cr 13 | AFNOR NF | |
| X 30 Cr 13 | DIN | |
| 1.4028 | DIN |