United Kingdom · B.S.

X 30 Cr 13

BS EN 10088-2:1995 — Stainless steels.Part 2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

Chemical composition

wt% · log scale
0.0010.010.1110100C0.26 – 0.35Cr12 – 14Mn1.5P0.04S0.015Si1
  • min – max range
  • typical value

Mechanical properties

value range by condition
HardnessHVHardnessHRcold-rolled strip, quenched and tempered, t <=, 3 mmTensile strength Rm≤740 MPaElongation A≥15 %HardnessHRHardnessHBcold-rolled strip, annealed, t <=, 6 mmYield strength Rp0.2≥600 MPaTensile strength Rm800–1000 MPaElongation A≥10 %hot-rolled heavy plate +QT800, t <=, 75 mmTensile strength Rm≤740 MPaElongation A≥15 %HardnessHRHardnessHBhot-rolled strip, annealed, t <=, 12 mm

Physical properties

vs. temperature
Elastic modulus GPa
190 – 220°C
Mean thermal expansion 10⁻⁶/K
10.5 – 12.0°C

Chemical composition

ElementminmaxSimilarRemarks
C0.260.35
Cr1214
Mn1.5
P0.04
S0.015
Si1

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
cold-rolled strip, quenched and tempered, t <=, 3 mmHV 450–550 HRC;HR 45–51 HRC
cold-rolled strip, annealed, t <=, 6 mm≤740≥15 For t < 3 mmHR ≤97 HRB;HB ≤235 HRB
hot-rolled heavy plate +QT800, t <=, 75 mm≥600800–1000≥10 For t < 3 mm
hot-rolled strip, annealed, t <=, 12 mm≤740≥15 For t < 3 mmHR ≤97 HRB;HB ≤235 HRB

Physical properties

20.0

Elastic modulusMean thermal expansionThermal conductivitySpecific heatResistivityDensityPoisson's ratio
215.00;210.00;220.0030.00460.000.607.70

Typical physical values

DensityElastic modulusPoisson's ratioRemarks
7.72–8.00190.00–210.000.27–0.30Typical property values for tool steel. These values are not taken from the standard; they are indicative and must not be used for design.
7.61–8.10190.00–215.000.27–0.30Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design.

Heat treatment

Type1
Heat-treatment curveCCT modified
Heat-treatment curveHardness-Tempering
Heat-treatment curveCCT
Heat-treatment curveTTT

Similar grades

GradeRegionSystem
1.4028ItalyUNI
1.4028SpainUNE
X 30 Cr 13SpainUNE
1.4028RomaniaSTAS
X 30 Cr 13RomaniaSTAS
1.4028SwedenSS
X 30 Cr 13SwedenSS
1.4028SwitzerlandSNV
X 30 Cr 13SwitzerlandSNV
1.4028FinlandSFS
X 30 Cr 13FinlandSFS
1.4028PolandPN
X 30 Cr 13PolandPN
1.4028AustriaONORM
X 30 Cr 13AustriaONORM
1.4028NorwayNS
X 30 Cr 13NorwayNS
1.4028BelgiumNBN
X 30 Cr 13BelgiumNBN
1.4028HungaryMSZ
X 30 Cr 13HungaryMSZ
1.4028Czech RepublicCSN
X 30 Cr 13Czech RepublicCSN
1.4028BulgariaBDS
X 30 Cr 13BulgariaBDS
1.4028United KingdomB.S.
1.4028FranceAFNOR NF
X 30 Cr 13ItalyUNI
X 30 Cr 13FranceAFNOR NF
X 30 Cr 13GermanyDIN
1.4028GermanyDIN