United Kingdom · B.S.
X 30 Cr 13
BS EN 10088-3:2005 — Stainless steels. Technical delivery conditions for semi-finished products,bars,rods,wire,sections and bright products of corrosion resisting steels for general purposes
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.26 | 0.35 | ||
| Cr | 12 | 14 | ||
| Mn | 1.5 | |||
| P | 0.04 | |||
| S | 0.03 | |||
| Si | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Wires +C1100, >= 0.05 mm | 1100–1350 | |||||
| Wires +C600, >= 0.05 mm | 600–800 | |||||
| Wires +C700, >= 0.05 mm | 700–900 | |||||
| Wires +C800, >= 0.05 mm | 800–1000 | |||||
| Wires +C900, >= 0.05 mm | 900–1100 | |||||
| Wires +C1000, >= 0.05 mm | 1000–1250 | |||||
| Wires +C1200, >= 0.05 mm | 1200–1450 | |||||
| Wires +C1400, >= 0.05 mm | 1400–1700 | |||||
| Wires +C1600, >= 0.05 mm | 1600–1900 | |||||
| Wires +C1800, >= 0.05 mm | 1800–2100 | |||||
| Wires +C500, >= 0.05 mm | 500–700 | |||||
| Wires +A, > 0.5 <= 1 mm | ≤1100 | ≥10 | ||||
| Wires +A, > 1 <= 3 mm | ≤1050 | ≥10 | ||||
| Wires +A, > 3 <= 5 mm | ≤1000 | ≥10 | ||||
| Wires +A, > 5 <= 16 mm | ≤950 | ≥15 | ||||
| rods, bars, wire, sections, bright products +QT850, <= 160 mm | ≥650 | 850–1000 | ≥10 After fracture; (trans.) | ≥15 (Longitudinal) | ||
| rods, bars, wire, sections, bright products +A | ≤800 | HB ≤245 | ||||
| bars +QT850, <= 10 mm | ≥700 | 900–1050 | ≥7 (Longitudinal) | |||
| bars +QT850, > 10 <= 63 mm | ≥650 | 900–1150 | ≥7 (Longitudinal) | |||
| bars +QT850, > 16 <= 40 mm | ≥650 | 850–1100 | ≥9 (Longitudinal) | ≥15 (Longitudinal) | ||
| bars +QT850, > 40 <= 63 mm | ≥650 | 850–1050 | ≥9 (Longitudinal) | ≥15 (Longitudinal) | ||
| bars +QT850, > 63 <= 160 mm | ≥650 | 850–1000 | ≥10 (Longitudinal) | ≥15 (Longitudinal) | ||
| bars, annealed, <= 16 mm | ≤950 | HB ≤305 | ||||
| bars, annealed, > 16 <= 40 mm | ≤900 | HB ≤280 | ||||
| bars, annealed, > 40 <= 63 mm | ≤840 | HB ≤260 | ||||
| bars, annealed, > 63 <= 160 mm | ≤800 | HB ≤245 |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 215.00;210.00;220.00 | 30.00 | 460.00 | 0.60 | 7.70 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.72–8.00 | 190.00–210.00 | 0.27–0.30 | Typical property values for tool steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | CCT modified |
| Heat-treatment curve | Hardness-Tempering |
| Heat-treatment curve | CCT |
| Heat-treatment curve | TTT |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.4028 | UNI | |
| 1.4028 | UNE | |
| X 30 Cr 13 | UNE | |
| 1.4028 | STAS | |
| X 30 Cr 13 | STAS | |
| 1.4028 | SS | |
| X 30 Cr 13 | SS | |
| 1.4028 | SNV | |
| X 30 Cr 13 | SNV | |
| 1.4028 | SFS | |
| X 30 Cr 13 | SFS | |
| 1.4028 | PN | |
| X 30 Cr 13 | PN | |
| 1.4028 | ONORM | |
| X 30 Cr 13 | ONORM | |
| 1.4028 | NS | |
| X 30 Cr 13 | NS | |
| 1.4028 | NBN | |
| X 30 Cr 13 | NBN | |
| 1.4028 | MSZ | |
| X 30 Cr 13 | MSZ | |
| 1.4028 | Czech Republic | CSN |
| X 30 Cr 13 | Czech Republic | CSN |
| 1.4028 | Bulgaria | BDS |
| X 30 Cr 13 | Bulgaria | BDS |
| 1.4028 | B.S. | |
| 1.4028 | AFNOR NF | |
| X 30 Cr 13 | UNI | |
| X 30 Cr 13 | AFNOR NF | |
| X 30 Cr 13 | DIN | |
| 1.4028 | DIN |