Finland · SFS
CW111C
SFS EN 12167
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Cu | Bal | |||
| Fe | 0.2 | |||
| Mn | 0.1 | |||
| Ni | 1.6 | 2.5 | ||
| Pb | 0.2 | |||
| Si | 0.4 | 0.8 | ||
| Total Others | 0.3 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Bars, hollow rods, rods, sheets | strips | strips | strips | |||
| Bars, rods, sheets, strips | hollow rods tubes H180 > 3 < 30 mm;hollow rods tubes H140 > 3 < 30 mm;hollow rods tubes H120 > 3 < 60 mm;hollow rods tubes H070 > 3 < 60 mm |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 8.80 |
Similar grades
| Grade | Region | System |
|---|---|---|
| CW111C | UNI | |
| CW111C | UNE | |
| CuNi2Si | UNE | |
| CW111C | SS | |
| CW111C | SNV | |
| CuNi2Si | SNV | |
| CuNi2Si | SFS | |
| CW111C | PN | |
| CuNi2Si | PN | |
| CW111C | ONORM | |
| CuNi2Si | ONORM | |
| CW111C | NS | |
| CuNi2Si | NS | |
| CW111C | NBN | |
| CuNi2Si | NBN | |
| CW111C | MSZ | |
| CuNi2Si | MSZ | |
| CW111C | DIN | |
| CW111C | Czech Republic | CSN |
| CuNi2Si | Czech Republic | CSN |
| CW111C | B.S. | |
| CW111C | Bulgaria | BDS |
| CuNi2Si | Bulgaria | BDS |
| CW111C | ASRO | |
| CuNi2Si | ASRO | |
| CW111C | AFNOR NF | |
| CuNi2Si | AFNOR NF | |
| CuNi2Si | UNI | |
| CuNi2Si | B.S. | |
| CuNi2Si | SS | |
| CuNi 2 Si | DIN |