United States · MIL
5083
MIL DTL 46083D:1998 — MIL DTL 46083D
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Bal | |||
| Cr | 0.05 | 0.25 | ||
| Cu | 0.1 | |||
| Fe | 0.4 | |||
| Mg | 4 | 4.9 | ||
| Mn | 0.4 | 1 | ||
| Others each | 0.05 | |||
| Others total | 0.15 | |||
| Si | 0.4 | |||
| Ti | 0.15 | |||
| Zn | 0.25 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Extrusions, t ≤ 50.80 mm | ≥241 Longitudinal | ≥310 Longitudinal | ≥9 Longitudinal |