United States · MIL

5083

MIL DTL 46027K:1998 — MIL DTL 46027K

Chemical composition

wt% · log scale
0.010.1110Cr0.05 – 0.25Cu0.1Fe0.4Mg4 – 4.9Mn0.4 – 1Others each0.05Others total0.15Si0.4Ti0.15Zn0.25
  • min – max range
  • typical value

Mechanical properties

value range by condition
Yield strength Rp0.2≥255 MPaTensile strength Rm≥310 MPaElongation A≥8 %Plates, 12.67 < t ≤ 50.80 mmYield strength Rp0.2≥255 MPaTensile strength Rm≥310 MPaElongation A≥8 %Plates, 12.67 < t ≤ 50.80 mm, Strain hardened only +H131Yield strength Rp0.2≥200 MPaTensile strength Rm≥283 MPaElongation A≥10 %Plates, 12.67 < t ≤ 50.80 mm, Strain hardened only +H136Yield strength Rp0.2≥200 MPaTensile strength Rm≥283 MPaElongation A≥10 %Plates, 12.67 < t ≤ 50.80 mm, Strain-hardened and stabilized +H321

Chemical composition

ElementminmaxSimilarRemarks
Al​​Bal​​
Cr0.050.25
Cu0.1
Fe0.4
Mg44.9
Mn0.41
Others each0.05
Others total0.15The sum of those "others" metallic elements 0.010% or more each
Si0.4
Ti0.15
Zn0.25

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
Plates, 12.67 < t ≤ 50.80 mm≥255 Longitudinal≥310 Longitudinal≥8 Longitudinal; The gage length shall be 1.400 inch (35.56mm) for plates having a nominal thickness of 0.500 inch (12.7mm)
Plates, 12.67 < t ≤ 50.80 mm, Strain hardened only +H131≥255≥310≥8
Plates, 12.67 < t ≤ 50.80 mm, Strain hardened only +H136≥200≥283≥10
Plates, 12.67 < t ≤ 50.80 mm, Strain-hardened and stabilized +H321≥200≥283≥10
Plates, 12.67 < t ≤ 50.80 mm, Strain-hardened only +H116≥200≥283≥10
Plates, 12.67 < t ≤ 50.80 mm +H112≥117≥269≥12
Plates, 50.80 < t ≤ 76.20 mm≥241 Longitudinal≥303 Longitudinal≥9 Longitudinal
Plates, 50.80 < t ≤ 76.20 mm, Strain hardened only +H131≥241≥303≥9
Plates, 50.80 < t ≤ 76.20 mm, Strain hardened only +H136≥200≥283≥10
Plates, 50.80 < t ≤ 76.20 mm, Strain-hardened and stabilized +H321≥200≥283≥10
Plates, 50.80 < t ≤ 76.20 mm, Strain-hardened only +H116≥200≥283≥10
Plates, 50.80 < t ≤ 76.20 mm +H112≥117≥269≥12
Plates, 6.35 < t ≤ 12.67 mm≥241 Longitudinal≥310 Longitudinal≥8 Longitudinal; The gage length shall be 1.400 inch (35.56mm) for plates having a nominal thickness of 0.500 inch (12.7mm)
Plates, 6.35 < t ≤ 12.67 mm, Strain hardened only +H131≥241≥310≥8
Plates, 6.35 < t ≤ 12.67 mm, Strain hardened only +H136≥214≥303≥10
Plates, 6.35 < t ≤ 12.67 mm, Strain-hardened and stabilized +H321≥214≥303≥10
Plates, 6.35 < t ≤ 12.67 mm, Strain-hardened and stabilized +H323≥234≥310≥10
Plates, 6.35 < t ≤ 12.67 mm, Strain-hardened and stabilized +H343≥269≥345≥8
Plates, 6.35 < t ≤ 12.67 mm, Strain-hardened and stabilized - 1/2 hard +H34≥269≥345≥8
Plates, 6.35 < t ≤ 12.67 mm, Strain-hardened and stabilized - 1/4 hard +H32≥234≥310≥10
Plates, 6.35 < t ≤ 12.67 mm, Strain-hardened only +H116≥214≥303≥10
Plates, 6.35 < t ≤ 12.67 mm +H112≥124≥276≥12