Germany · DIN

1.0562

DIN EN 10217-3:2005 — Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

Available suppliers

Need a supplier recommendation?

No matching listed supplier for this grade. If you need to buy or inquire, we can help route the request.

Include the grade and standard number. We will reply as soon as we can.

DIN 17103:1989DIN 17103
DIN 17179:1986Seamless circular tubes of fine grain steels for special requirements; technical delivery conditions
DIN EN 10216-3:2004Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN 10028-3:2009Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DIN 17178:1986Welded circular tuber of fine grain steels for special requirements; technical delivery conditions
DIN EN 10253-2:2008Butt-welding pipe fittings. Part 2:Non alloy and ferritic alloy steels with specific inspection requirements
DIN EN 10217-3:2005Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN 17125:1997Square and rectangular fine grain steel tubes (hollow sections) for structural steelwork; technical delivery conditions
DIN 17123:1997DIN 17123
SEW 081SEW 081

See a mistake? Send a correction.

Element	min	max	Similar	Remarks
Al	0.02		Al/N=>2	Al/N=>2
C		0.2
Cr		0.3
Cr+Cu+Mo			The sum of the percentage by mass of the three elements Cr	The sum of the percentage by mass of the three elements Cr
Cu		0.3
Mn	0.9	1.7
Mo		0.08
N		0.02
Nb		0.05
Nb+Ti+V		0.12
Ni		0.5
P		0.025
S		0.02
Si		0.5
Ti		0.03
V		0.1

Mechanical properties

Heat treatment / condition	Yield strength	Tensile strength	Elongation	Impact energy
welded steel tube +N, 12 < T <=, 20 mm	≥355 or Upper yield stress	490–650	≥22 long. test
welded steel tube +N, 20 < T <=, 40 mm	≥345 or Upper yield stress	490–630	≥22 long. test
welded steel tube +N, T <= 12 mm	≥355 or Upper yield stress	490–650	≥22 long. test
welded steel tube, welded condition				≥39 KV (20°C)；≥31 KV (-10°C)；≥31 KV (-0°C)；≥27 KV (-20°C)；≥55 KV (20°C)；≥47 KV (0°C)；≥43 KV (-10°C)；≥40 KV (-20°C)

Temperature

-100.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
217.00	10.80	37.60	371.00	0.18

0.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
213.00	11.70	41.60	451.00	0.24

20.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
212.00	11.90	42.20	461.00	0.25	7.83

100.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
207.00	12.50	43.20	496.00	0.30

200.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
199.00	13.00	42.90	533.00	0.37

300.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
192.00	13.60	41.20	568.00	0.45

400.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
184.00	14.10	39.10	611.00	0.56

500.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
175.00	14.50	36.60	677.00	0.67

600.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
164.00	14.90	34.10	778.00	0.81

Density	Elastic modulus	Poisson's ratio	Remarks
7.86	203.00	0.27–0.30	低碳，低合金钢的典型性能数值。此值不来源于标准，它是指示性指标，不能被用于设计用途。

Impact energy Kv/Ku (J)

Condition	Temperature ℃	min	Remarks
welded steel tubes as-welded	-10	31	KV
welded steel tubes as-welded	-20	27	KV
welded steel tubes as-welded	0	31	KV
welded steel tubes as-welded	-10	43	KV
welded steel tubes as-welded	-20	40	KV