Sweden · SS
CuAl11Fe6Ni6
SS EN 12167
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 10.5 | 12.5 | ||
| Cu | Bal | |||
| Fe | 5 | 7 | ||
| Mn | 1.5 | |||
| Ni | 5 | 7 | ||
| Pb | 0.05 | |||
| Si | 0.2 | |||
| Sn | 0.1 | |||
| Total Others | 0.2 | |||
| Zn | 0.5 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Bars, hollow rods, rectangle, rods | sheets | sheets | sheets | |||
| Bars, rectangle, rods, sheets | hollow rods strips |
Physical properties
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 7.40 |
Similar grades
| Grade | Region | System |
|---|---|---|
| CW308G | UNI | |
| CW308G | UNE | |
| CuAl11Fe6Ni6 | UNE | |
| CW308G | SS | |
| CW308G | SNV | |
| CuAl11Fe6Ni6 | SNV | |
| CW308G | SFS | |
| CuAl11Fe6Ni6 | SFS | |
| CW308G | PN | |
| CuAl11Fe6Ni6 | PN | |
| CW308G | ONORM | |
| CuAl11Fe6Ni6 | ONORM | |
| CW308G | NS | |
| CuAl11Fe6Ni6 | NS | |
| CW308G | NBN | |
| CuAl11Fe6Ni6 | NBN | |
| CW308G | MSZ | |
| CuAl11Fe6Ni6 | MSZ | |
| CW308G | DIN | |
| CW308G | Czech Republic | CSN |
| CuAl11Fe6Ni6 | Czech Republic | CSN |
| CW308G | B.S. | |
| CW308G | Bulgaria | BDS |
| CuAl11Fe6Ni6 | Bulgaria | BDS |
| CW308G | ASRO | |
| CuAl11Fe6Ni6 | ASRO | |
| CW308G | AFNOR NF | |
| CuAl11Fe6Ni6 | AFNOR NF | |
| CuAl11Fe6Ni6 | UNI | |
| CuAl11Fe6Ni6 | B.S. | |
| CuAl11Fe6Ni6 | DIN |