Czech Republic · CSN

EN AW-2014A

CSN EN 754-2 — Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties

Available suppliers

Need a supplier recommendation?

No matching listed supplier for this grade. If you need to buy or inquire, we can help route the request.

Email us [email protected]

Include the grade and standard number. We will reply as soon as we can.

Standards

CSN EN 755-2Aluminium and aluminium alloys. Extruded rod/bar,tube and profiles. Part 2:Mechanical properties
CSN EN 485-2Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
CSN EN 754-2Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
CSN EN 1301-2CSN EN 1301-2
CSN EN 1715-3Aluminium and aluminium alloys - Drawing stock - Part 3 : specific requirements for mechanical uses (excluding welding)
CSN EN 486Aluminium and aluminium alloys - Extrusion ingots - Specifications
CSN EN 487Aluminium and aluminium alloys - Rolling ingots - Specifications
CSN EN 573-3Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3 : chemical composition and form of products.

Correct the data

See a mistake? Send a correction.

Correct the data

Chemical composition

wt% · log scale

min – max range
typical value

Mechanical properties

value range by condition

Chemical composition

Element	min	max	Remarks
Al			Bal
Cr		0.1
Cu	3.9	5
Fe		0.5
Mg	0.2	0.8
Mn	0.4	1.2
Ni		0.1
Others each		0.05	Includes listed elements for which no specific limit is shown.
Si	0.5	0.9
Ti		0.15
Ti+Zr		0.2
Total Others		0.15	The sum of those "Others" metallic elements 0.010% or more each
Zn		0.25

Mechanical properties

Heat treatment / condition	Yield strength	Tensile strength	Elongation
Drawn bars/rods, Annealed +O, <= 80 mm +T - thickness; +A - area	≤125	≤240	≥12
Drawn bars/rods, Solution heat treated and artificially aged , <= 80 mm	≥380	≥450	≥8
Drawn bars/rods, Solution heat treated and naturally aged , <= 80 mm +T - thickness; +A - area	≥220	≥380	≥8
Drawn bars/rods, Solution heat treated and naturally aged +T451, <= 80 mm +T - thickness; +A - area	≥220	≥380	≥10
Drawn bars/rods, Solution heat treated, cold worked and naturally aged , <= 80 mm +T - thickness; +A - area	≤290	≤380	≤8
Drawn bars/rods, Solution heat treated, cold worked and naturally aged +T351, <= 80 mm +T - thickness; +A - area	≤290	≤380	≤6
Drawn bars/rods, Strain-hardened only +H111, <= 80 mm +T - thickness; +A - area	≤125	≤240	≥12
Drawn bars/rods, solution heat treated artificially aged, <= 80 mm	≥380	≥450	≥8
Drawn tubes, Annealed +O, <= 20 mm +T - thickness; +A - area	≤125	≤240	≥12
Drawn tubes, Solution heat treated and artificially aged +T6510, <= 20 mm	≥380	≥450	≥8
Drawn tubes, Solution heat treated and artificially aged +T6511, <= 20 mm	≥380	≥450	≥8
Drawn tubes, Solution heat treated and naturally aged , <= 20 mm +T - thickness; +A - area	≥240	≥380	≥12
Drawn tubes, Solution heat treated and naturally aged +T4510, <= 20 mm +T - thickness; +A - area	≥240	≥380	≥10
Drawn tubes, Solution heat treated and naturally aged +T4511, <= 20 mm +T - thickness; +A - area	≥240	≥380	≥10
Drawn tubes, Solution heat treated, cold worked and naturally aged , <= 20 mm +T - thickness; +A - area	≤290	≤380	≤8
Drawn tubes, Solution heat treated, cold worked and naturally aged +T3510, <= 20 mm +T - thickness; +A - area	≤290	≤380	≤6
Drawn tubes, Solution heat treated, cold worked and naturally aged +T3511, <= 20 mm +T - thickness; +A - area	≤290	≤380	≤6
Drawn tubes, Strain-hardened only +H111, <= 20 mm +T - thickness; +A - area	≤125	≤240	≥12
Drawn tubes, solution heat treated artificially aged, <= 20 mm	≥380	≥450	≥8