Spain · UNE
EN AW-7075
UNE EN 486
Chemical composition
wt% · log scale- min – max range
- typical value
Physical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Bal | |||
| Cr | 0.18 | 0.28 | ||
| Cu | 1.2 | 2 | ||
| Fe | 0.5 | |||
| Mg | 2.1 | 2.9 | ||
| Mn | 0.3 | |||
| Others each | 0.05 | Includes listed elements for which no specific limit is shown. | ||
| Si | 0.4 | |||
| Ti | 0.2 | |||
| Ti+Zr | 0.25 | May be used for extruded and forged products if mutually agreed by supplier or manufacturer and purchaser. | ||
| Total Others | 0.15 | The sum of those "Others" metallic elements 0.010% or more each | ||
| Zn | 5.1 | 6.1 |
Physical properties
-50.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 21.60 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 2.60–2.90 | 69.00–79.00 | 0.33 | Typical property values for aluminum alloys. These values are not taken from a published standard; they are indicative only and must not be used for design. |
Fatigue
| Item | Detail |
|---|---|
| Product | Plates; 90 mm; Solution heat treated and artificially overaged (T7351) |
| Experiment | Total strain control; R=-1; Frequency: 0.1-10 Hz; T: 23°C |
| Specimen | Hourglass; Diameter [mm]: 6; Gauge length [mm]: 4; Direction: L |
| Property | Value |
|---|---|
| Elastic modulus (GPa) | 71.0 |
| Yield strength (MPa) | 382.0 |
| Tensile strength (MPa) | 462.0 |
| Elongation (%) | 8.4 |
| Poisson's ratio | 663.0 |
| No. | Cyclic yield strength (MPa) | Cyclic strain-hardening exponent n′ | Cyclic strength coefficient K′ (MPa) | Fatigue strength coefficient σ′f (MPa) | Fatigue strength exponent b | Fatigue ductility coefficient ε′f | Fatigue ductility exponent c |
|---|---|---|---|---|---|---|---|
| 1 | 388 | 0.0940 | 695 | 988 | -0.1403 | 5.3384 | -1.1609 |
| No. | Specimen | Cycles |
|---|---|---|
| 1 | Hourglass; Diameter [mm]: 6; Gauge length [mm]: 4; Direction: L | 2E6 |
Similar grades
| Grade | Region | System |
|---|---|---|
| EN AW-AlZn5 | 5MgCu | Sweden |
| EN AW-7075 | SS | |
| EN AW-AlZn5 | 5MgCu | Finland |
| EN AW-7075 | SFS | |
| EN AW-AlZn5 | 5MgCu | Poland |
| EN AW-7075 | PN | |
| EN AW-AlZn5 | 5MgCu | Belgium |
| EN AW-7075 | NBN | |
| EN AW-AlZn5 | 5MgCu | Bulgaria |
| EN AW-7075 | Bulgaria | BDS |
| EN AW-AlZn5 | 5MgCu | Romania |
| EN AW-7075 | ASRO | |
| EN AW-AlZn5 | 5MgCu | United Kingdom |
| EN AW-7075 | B.S. | |
| EN AW-AlZn5 | 5MgCu | France |
| EN AW-7075 | AFNOR NF | |
| EN AW-AlZn5 | 5MgCu | Italy |
| EN AW-7075 | UNI | |
| EN AW-AlZn5 | 5MgCu | Spain |
| EN AW-AlZn5 | 5MgCu | Switzerland |
| EN AW-7075 | SNV | |
| EN AW-AlZn5 | 5MgCu | Austria |
| EN AW-7075 | ONORM | |
| EN AW-AlZn5 | 5MgCu | Norway |
| EN AW-7075 | NS | |
| EN AW-AlZn5 | 5MgCu | Hungary |
| EN AW-7075 | MSZ | |
| EN AW-AlZn5 | 5MgCu | Germany |
| EN AW-7075 | DIN | |
| EN AW-AlZn5 | 5MgCu | Czech Republic |
| EN AW-7075 | Czech Republic | CSN |