France · AFNOR NF
EN AW-5019
NF EN 573-3
Chemical composition
wt% · log scale- min – max range
- typical value
Physical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Bal | |||
| Cr | 0.2 | |||
| Cu | 0.1 | |||
| Fe | 0.5 | |||
| Mg | 4.5 | 5.6 | ||
| Mn | 0.1 | 0.6 | ||
| Mn+Cr | 0.1 | 0.6 | ||
| Others each | 0.05 | Includes listed elements for which no specific limit is shown. | ||
| Si | 0.4 | |||
| Ti | 0.2 | |||
| Total Others | 0.15 | The sum of those "Others" metallic elements 0.010% or more each | ||
| Zn | 0.2 |
Physical properties
-50.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 22.50 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 2.60–2.90 | 69.00–79.00 | 0.33 | Typical property values for aluminum alloys. These values are not taken from a published standard; they are indicative only and must not be used for design. |
Similar grades
| Grade | Region | System |
|---|---|---|
| EN AW-AlMg5 | SS | |
| EN AW-5019 | SS | |
| EN AW-AlMg5 | SFS | |
| EN AW-5019 | SFS | |
| EN AW-AlMg5 | PN | |
| EN AW-5019 | PN | |
| EN AW-AlMg5 | NBN | |
| EN AW-5019 | NBN | |
| EN AW-AlMg5 | Bulgaria | BDS |
| EN AW-5019 | Bulgaria | BDS |
| EN AW-AlMg5 | ASRO | |
| EN AW-5019 | ASRO | |
| EN AW-AlMg5 | B.S. | |
| EN AW-5019 | B.S. | |
| EN AW-AlMg5 | AFNOR NF | |
| EN AW-AlMg5 | UNI | |
| EN AW-5019 | UNI | |
| EN AW-AlMg5 | UNE | |
| EN AW-5019 | UNE | |
| EN AW-AlMg5 | SNV | |
| EN AW-5019 | SNV | |
| EN AW-AlMg5 | ONORM | |
| EN AW-5019 | ONORM | |
| EN AW-AlMg5 | NS | |
| EN AW-5019 | NS | |
| EN AW-AlMg5 | MSZ | |
| EN AW-5019 | MSZ | |
| EN AW-AlMg5 | DIN | |
| EN AW-5019 | DIN | |
| EN AW-AlMg5 | Czech Republic | CSN |
| EN AW-5019 | Czech Republic | CSN |