Romania · ASRO
CW111C
SR EN 1652
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Cu | Bal | |||
| Fe | 0.2 | |||
| Mn | 0.1 | |||
| Ni | 1.6 | 2.5 | ||
| Pb | 0.02 | |||
| Si | 0.4 | 0.8 | ||
| Total Others | 0.3 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Circles, plates, sheets, strips, R260, > 1 < 10 mm | 60.00 | 260.00 | ||||
| Circles, plates, sheets, strips, R450, > 0 | 6 < 3 mm | 6 < 3 mm | ||||
| Circles, plates, sheets, strips, R490, > 1 < 10 mm | 340.00 | 490.00 | ||||
| Circles, plates, sheets, strips, R640, > 0 | 6 < 3 mm | 6 < 3 mm | ||||
| Circles, sheets, strips, H070, > 1 < 10 mm, HV | plates 70.00 | |||||
| Circles, sheets, strips, H130, > 0, 6 < 3 mm | plates HV | |||||
| Circles, sheets, strips, H140, > 1 < 10 mm, HV | plates 140.00 | |||||
| Circles, sheets, strips, H170, > 0, 6 < 3 mm | plates HV |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 8.80 |
Similar grades
| Grade | Region | System |
|---|---|---|
| CW111C | UNI | |
| CW111C | UNE | |
| CuNi2Si | UNE | |
| CW111C | SS | |
| CW111C | SNV | |
| CuNi2Si | SNV | |
| CW111C | SFS | |
| CuNi2Si | SFS | |
| CW111C | PN | |
| CuNi2Si | PN | |
| CW111C | ONORM | |
| CuNi2Si | ONORM | |
| CW111C | NS | |
| CuNi2Si | NS | |
| CW111C | NBN | |
| CuNi2Si | NBN | |
| CW111C | MSZ | |
| CuNi2Si | MSZ | |
| CW111C | DIN | |
| CW111C | Czech Republic | CSN |
| CuNi2Si | Czech Republic | CSN |
| CW111C | B.S. | |
| CW111C | Bulgaria | BDS |
| CuNi2Si | Bulgaria | BDS |
| CuNi2Si | ASRO | |
| CW111C | AFNOR NF | |
| CuNi2Si | AFNOR NF | |
| CuNi2Si | UNI | |
| CuNi2Si | B.S. | |
| CuNi2Si | SS | |
| CuNi 2 Si | DIN |