Sweden · SS

EN AW-5083

SS EN 755-2

Chemical composition

wt% · log scale

min – max range
typical value

Mechanical properties

value range by condition

Physical properties

vs. temperature

Mean thermal expansion 10⁻⁶/K

Chemical composition

Element	min	max	Similar	Remarks
Al				Bal
Cr	0.05	0.25
Cu		0.1
Fe		0.4
Mg	4	4.9
Mn	0.4	1
Si		0.4
Ti		0.15
Total Each		0.05
Total Others		0.15
Zn		0.25

Mechanical properties

Heat treatment / condition	Yield strength	Tensile strength	Elongation	Reduction of area	Impact energy	Hardness
Extruded bars/rods, Annealed +O, <= 200 mm +D; <= 200 mm +T +T - thickness; +A - area	≥110	≥270	≥12
Extruded bars/rods, Strain-hardened only +H111, <= 200 mm +D; <= 200 mm +T +T - thickness; +A - area	≥125	≥270	≥12
Extruded bars/rods +H112, <= 200 mm +D; <= 200 mm +T +T - thickness; +A - area	≥110	≥270	≥12
Extruded bars/rods +F, <= 200 mm +D; <= 200 mm +T +T - thickness; +A - area	≥110	≥270	≥12
Extruded bars/rods +F, > 25 <= 250 mm +D; > 200 <= 250 mm +T +D - diametar; +T - thickness	≥100	≥260	≥12
Extruded tubes, Annealed +O, all sizes	≥125	≥270	≥12
Extruded tubes, Strain-hardened only +H111, all sizes	≥110	≥270	≥12
Extruded tubes +H112, all sizes	≥125	≥270	≥12
Extruded tubes +F, all sizes	≥110	≥270	≥12
extruded sections +H112, all sizes	≥125	≥270	≥12
extruded profiles +F, all sizes	≥110	≥270	≥12

Physical properties

Temperature

-50.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	22.30

100.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	24.20

200.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	25.00

300.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	26.00

999.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
71.00	24.20		900.00

Typical physical values

Density	Elastic modulus	Poisson's ratio	Remarks
2.60–2.90	69.00–79.00	0.33	Typical property values for aluminum alloys. These values are not taken from a published standard; they are indicative only and must not be used for design.

Similar grades

Grade	Region	System
EN AW-AlMg4	5Mn0	7
EN AW-5083	Italy	UNI
EN AW-AlMg4	5Mn0	7
EN AW-5083	Spain	UNE
EN AW-AlMg4	5Mn0	7
EN AW-5083	Switzerland	SNV
EN AW-AlMg4	5Mn0	7
EN AW-5083	Finland	SFS
EN AW-AlMg4	5Mn0	7
EN AW-5083	Poland	PN
EN AW-AlMg4	5Mn0	7
EN AW-5083	Austria	ONORM
EN AW-AlMg4	5Mn0	7
EN AW-5083	Norway	NS
EN AW-AlMg4	5Mn0	7
EN AW-5083	Belgium	NBN
EN AW-AlMg4	5Mn0	7
EN AW-5083	Hungary	MSZ
EN AW-AlMg4	5Mn0	7
EN AW-5083	Germany	DIN
EN AW-AlMg4	5Mn0	7
EN AW-5083	Czech Republic	CSN
EN AW-AlMg4	5Mn0	7
EN AW-5083	United Kingdom	B.S.
EN AW-AlMg4	5Mn0	7
EN AW-5083	Bulgaria	BDS
EN AW-AlMg4	5Mn0	7
EN AW-5083	Romania	ASRO
EN AW-AlMg4	5Mn0	7
EN AW-5083	France	AFNOR NF
SB-209 5083	United States	ASME
EN AW-AlMg4	5Mn0	7
EN AW-5083	European Union	EN