France · AFNOR NF
EN AC-46600
NF EN 1706
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Bal | |||
| Cu | 1.5 | 2.5 | ||
| Fe | 0.8 | For ingots: Fe= max 0.70 % | ||
| Mg | 0.35 | |||
| Mn | 0.15 | 0.65 | ||
| Ni | 0.35 | |||
| Pb | 0.25 | |||
| Si | 6 | 8 | ||
| Sn | 0.15 | |||
| Ti | 0.25 | For ingots: Ti= max 0.20 % | ||
| Total Each | 0.05 | |||
| Total Others | 0.15 | "Others" does not include elements like Na | ||
| Zn | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Chill or permanent mould castings +K +F, > 12 mm +T - thickness; +A - area | ≥100 | ≥170 | ≥1 | HB ≥75 HBS | ||
| Sand castings +S +F, > 12 mm +T - thickness; +A - area | ≥90 | ≥150 | ≥1 | HB ≥60 HBS |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 2.60–2.90 | 69.00–79.00 | 0.33 | Typical property values for aluminum alloys. These values are not taken from a published standard; they are indicative only and must not be used for design. |
Similar grades
| Grade | Region | System |
|---|---|---|
| EN AC-Al Si7Cu2 | UNI | |
| EN AC-46600 | UNI | |
| EN AC-Al Si7Cu2 | UNE | |
| EN AC-46600 | UNE | |
| EN AC-Al Si7Cu2 | SS | |
| EN AC-46600 | SS | |
| EN AC-Al Si7Cu2 | SNV | |
| EN AC-46600 | SNV | |
| EN AC-Al Si7Cu2 | SFS | |
| EN AC-46600 | SFS | |
| EN AC-Al Si7Cu2 | PN | |
| EN AC-46600 | PN | |
| EN AC-Al Si7Cu2 | ONORM | |
| EN AC-46600 | ONORM | |
| EN AC-Al Si7Cu2 | NS | |
| EN AC-46600 | NS | |
| EN AC-Al Si7Cu2 | NBN | |
| EN AC-46600 | NBN | |
| EN AC-Al Si7Cu2 | MSZ | |
| EN AC-46600 | MSZ | |
| EN AC-Al Si7Cu2 | DIN | |
| EN AC-46600 | DIN | |
| EN AC-Al Si7Cu2 | Czech Republic | CSN |
| EN AC-46600 | Czech Republic | CSN |
| EN AC-Al Si7Cu2 | B.S. | |
| EN AC-46600 | B.S. | |
| EN AC-Al Si7Cu2 | Bulgaria | BDS |
| EN AC-46600 | Bulgaria | BDS |
| EN AC-Al Si7Cu2 | ASRO | |
| EN AC-46600 | ASRO | |
| EN AC-Al Si7Cu2 | AFNOR NF |