Hungary · MSZ

CC481K

MSZ EN 1982

Chemical composition

wt% · log scale
0.0010.010.11101001000Al0.01Cu87 – 89.5Fe0.1Mn0.05Ni0.1P0.5 – 1Pb0.25S0.05Sb0.05Si0.01Sn10 – 11.5Zn0.05
  • min – max range
  • typical value

Mechanical properties

value range by condition
Yield strength Rp0.2≥170 MPaTensile strength Rm≥330 MPaElongation A≥4 %HardnessHBCentrifugal castings +GZYield strength Rp0.2≥170 MPaTensile strength Rm≥310 MPaElongation A≥2 %HardnessHBPermanent mould castings +GMYield strength Rp0.2≥130 MPaTensile strength Rm≥250 MPaElongation A≥5 %HardnessHBSand castings +GSYield strength Rp0.2≥170 MPaTensile strength Rm≥350 MPaElongation A≥5 %HardnessHBround bars

Chemical composition

ElementminmaxSimilarRemarks
Al0.01
Cu8789.5
Fe0.1
Mn0.05
Ni0.1
P0.51For sand casted non-carry applications the content of phosphorus should be P=max 0.15%For sand casted non-carry applications the content of phosphorus should be P=max 0.15%
Pb0.25
S0.05
Sb0.05
Si0.01
Sn1011.5
Zn0.05

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
Centrifugal castings +GZ≥170≥330≥4HB ≥85
Permanent mould castings +GM≥170≥310≥2HB ≥85
Sand castings +GS≥130≥250≥5HB ≥60
round bars≥170≥350≥5HB ≥85