Sweden · SS
EN AW-5070
SS EN 485-2
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Bal | |||
| Cr | 0.3 | |||
| Cu | 0.25 | |||
| Fe | 0.44 | |||
| Mg | 3.5 | 4.5 | ||
| Mn | 0.4 | 0.8 | ||
| Si | 0.25 | |||
| Ti | 0.15 | |||
| Total Each | 0.05 | |||
| Total Others | 0.15 | |||
| Zn | 0.4 | 0.8 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| heavy plate, steel strip, Annealed +O, > 0.5 <= 6.0 mm, sheet | 125 | 270 350.00 | 18.00 | |||
| heavy plate, steel strip, Strain-hardened only +H111, > 0.5 <= 6.0 mm, sheet | 125 | 270 350.00 | 18.00 |