Spain · UNE
PSL2 Grade X80QE
UNE EN ISO 3183
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 0.015 | 0.06 | Al total | Al total |
| C | 0.18 | For each reduction of 0.01% below the specified max.concentration for C | For each reduction of 0.01% below the specified max.concentration for C | |
| CE Pcm | As agreed | As agreed | ||
| CEV | As agreed | As agreed | ||
| Cr | 0.5 | |||
| Cu | 0.25 | |||
| Mn | 1.9 | |||
| Mo | 0.5 | |||
| N | 0.012 | Al/N=＞2:1 | Al/N=＞2:1 | |
| Nb | 0.07 | |||
| Ni | 0.6 | |||
| P | 0.025 | |||
| S | 0.015 | |||
| Si | 0.45 | |||
| Ti | 0.7 | |||
| V | 0.11 | |||
| V+Nb+Ti | 0.15 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| steel tubest 25~40mm, quenched and tempered | 555–675 Rp0.5 | 625–825 Rt0.5/Rm ratio max.0.90 | ≥18 These values apply to trans.test pieces taken from the pipe body.when long.te |