Sweden · SS
PSL2 Grade L360NE
SS EN ISO 3183
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 0.015 | 0.06 | Al total | Al total |
| C | 0.22 | For each reduction of 0.01% below the specified max.concentration for C | For each reduction of 0.01% below the specified max.concentration for C | |
| CE Pcm | 0.25 | Product analysis C≤0.12% | Product analysis C≤0.12% | |
| CEV | 0.43 | Seamless pipe with t＞20.00mm | Seamless pipe with t＞20.00mm | |
| Cr | 0.3 | |||
| Cu | 0.25 | |||
| Mn | 1.4 | |||
| Mo | 0.1 | |||
| N | 0.012 | Al/N≥2:1 | Al/N≥2:1 | |
| Nb | 0.05 | |||
| Ni | 0.3 | |||
| P | 0.025 | |||
| S | 0.015 | |||
| Si | 0.45 | |||
| Ti | 0.04 | |||
| V | 0.1 | |||
| V+Nb+Ti | 0.15 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| steel tubes;25 < t ≤ 40 mm, normalize-rolled, normalized , normalized or normalized or tempered | 360–510 Rp0.5 | 460–760 Rt0.5/Rm ratio max.0.85 | ≥20 These values apply to trans.test pieces taken from the pipe body.when long.test pieces are tested |