International standard · ISO
20 Cr 4
ISO 683-17:1999 — ISO 683-17
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 0.05 | |||
| C | 0.17 | 0.23 | ||
| Cr | 0.9 | 1.2 | ||
| Cu | 0.3 | |||
| Mn | 0.6 | 0.9 | ||
| P | 0.025 | |||
| S | 0.015 | Where machinability is of primary importance | ||
| Si | 0.4 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| +AC | HB ≤170 | |||||
| Rod, coil, ring, tube isothermal treated ferrite - hardness range of the pearlitic structure (+ FP) | HB 140–187 | |||||
| bars, steel bars +HR, HB | Steel coil 156.00 | |||||
| bars, HB | Steel bar annealed (+A) 207 |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | Hardenability |