United States · AMS
6156
SAE AMS 4405A:2012 — SAE AMS 4405A
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Bal; Also as cladding material | |||
| Cr | 0.25 | For core (6156) | ||
| Cu | 0.7 | 1.1 | For core (6156); For cladding material (1300) Cu <= 0.05% | |
| Fe | 0.2 | For core (6156); For cladding material (1300) Fe <= 0.3% | ||
| Mg | 0.6 | 1.2 | For core (6156); For cladding material (1300) Mg <= 0.03% | |
| Mn | 0.4 | 0.7 | For core (6156); For cladding material (1300) Mn <= 0.03% | |
| Others Total | 0.15 | For both material | ||
| Others each | 0.05 | For both material | ||
| Si | 0.7 | 1.3 | For core (6156); For cladding material (1300) Si <= 0.2% | |
| Ti | For cladding material (1300) Ti <= 0.03% | |||
| Zn | 0.1 | 0.7 | For core (6156); For cladding material (1300) 0.2 < Zn <= 0.5% |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| sheet, Solution heat treated and artificially aged +T62, 2 < t <= 5 mm; > 2% of total thickness is cladding thickness per side | ≥324 | ≥358 | ≥8 Lo = 50.8mm or 4D | |||
| sheet, Solution heat treated and naturally aged , 2 < t <= 5 mm; > 2% of total thickness is cladding thickness per side | ≥165 | ≥276 | ≥15 Lo = 50.8mm or 4D |