China · GB
18MnMoNbR
GB 6654:1996 — Steel plates for pressure vessels
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- Plates Heat treated 60 < t <= 100 mm · Yield strength Rp0.2
- Plates Heat treated 30 < t <= 60 mm · Yield strength Rp0.2
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.22 | |||
| Cr | 0.3 | |||
| Cr+Ni+Cu | 0.6 | |||
| Cu | 0.3 | |||
| Mn | 1.2 | 1.6 | ||
| Mo | 0.45 | 0.65 | ||
| Nb | 0.025 | 0.05 | ||
| Ni | 0.3 | |||
| P | 0.035 | |||
| S | 0.03 | |||
| Si | 0.15 | 0.5 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Plates, normalized and tempered, 30 < t <=, 60 mm | ≥440 | 590–740 | ≥17 | |||
| Plates, normalized and tempered, 60 < t <=, 100 mm | ≥410 | 570–720 | ≥17 | |||
| t 30~60mm, normalized+tempered | ≥440 | 590–740 | ≥17 | ≥34 Akv transverse | ||
| t 60~100mm, normalized+tempered | ≥410 | 570–720 | ≥17 | ≥34 Akv transverse |
High/low temperature
| Condition | Temperature ℃ | Approx. |
|---|---|---|
| Plates Heat treated 60 < t <= 100 mm | 450 | 295 |
| Plates Heat treated 60 < t <= 100 mm | 400 | 315 |
| Plates Heat treated 60 < t <= 100 mm | 350 | 330 |
| Plates Heat treated 60 < t <= 100 mm | 300 | 340 |
| Plates Heat treated 60 < t <= 100 mm | 250 | 350 |
| Plates Heat treated 60 < t <= 100 mm | 200 | 360 |
| Plates Heat treated 30 < t <= 60 mm | 450 | 315 |
| Plates Heat treated 30 < t <= 60 mm | 400 | 335 |
| Plates Heat treated 30 < t <= 60 mm | 350 | 350 |
| Plates Heat treated 30 < t <= 60 mm | 300 | 360 |
| Plates Heat treated 30 < t <= 60 mm | 250 | 370 |
| Plates Heat treated 30 < t <= 60 mm | 200 | 380 |
| Condition | Temperature ℃ | min | Remarks |
|---|---|---|---|
| Plates Heat treated ( transverse ) | 0 | 31 | KV; Average value of 3 test pieces; For transverse direction. |