Germany · DIN

1.4864

DIN EN 10095:1999 — Heat resisting steels and nickel alloys.

wt% · log scale

value range by condition

vs. temperature

Mean thermal expansion 10⁻⁶/K

Thermal conductivity W/(m·K)

Temperature °C · time at rupture

Chemical composition

Heat treatment / condition	Yield strength	Tensile strength	Elongation	Hardness
Flat products +AT, <= 75 mm	≥230	550–750	≥30 For a >= 3 mm; (long./trans.)；≥28 0.5 mm <= a < 3 mm; (long./trans.)	HB ≤223
sections, wire +AT, <= 25 mm	≤230	≤550	≤30
sections, HB				Wire rod solution-annealed (AT) <= 25 mm 223
bars +AT, <= 160 mm	≥230	550–750	≥30	HB ≤223

Temperature

20.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
		12.50	550.00	1.00	8.00

200.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	15.00

400.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	16.00

500.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
		17.00

600.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	17.00

800.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	17.50

1000.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
	18.50

Density	Elastic modulus	Poisson's ratio	Remarks
7.61–8.10	190.00–215.00	0.27–0.30	Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design.
7.86	190.00–210.00	0.27–0.30	Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design.

Temperature ℃	Time h	Rp1	CRS
600	1000.0h	105.0	180.0
600	10000.0h	80.0	125.0
600	100000.0h	40.0	75.0
700	1000.0h	50.0	75.0
700	10000.0h	35.0	45.0
700	100000.0h	14.0	25.0
800	1000.0h	25.0	35.0
800	10000.0h	15.0	20.0
800	100000.0h	4.0	7.0
900	1000.0h	12.0	15.0
900	10000.0h	5.0	8.0
900	100000.0h	1.5	3.0
1000	100000.0h		1.5