Germany · DIN
1.4006
DIN 17440:1996 — Technical delivery conditions for plates, hot rolled strip and bars for pressure purposes, drawn wire and forgings
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.08 | 0.15 | ||
| Cr | 11.5 | 13.5 | ||
| Mn | 1.5 | |||
| Ni | 0.75 | |||
| P | 0.04 | |||
| S | 0.03 | |||
| Si | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Wires, Tempered, 2 <=, t <=, 20 mm | 600–800 | |||||
| Wires, annealed, 2 <=, t <=, 20 mm | 450–650 | |||||
| bars, forgings, Tempered, <= 25 mm | ≤420 | ≤600 | ≤20 | |||
| bars, forgings, Tempered, <= 60 mm | ≤420 | ≤600 | ≤15;≤18 | |||
| bars, forgings, Tempered, > 60 <= 160 mm | ≤420 | ≤600 | ≤13;≤15 | |||
| bars, forgings, annealed, <= 25 mm | ≤250 | ≤450 | ≤20 | |||
| bars, forgings, annealed, <= 60 mm | ≤250 | ≤450 | ≤15;≤18 | |||
| bars, forgings, annealed, > 60 <= 160 mm | ≤250 | ≤450 | ≤13;≤15 | |||
| bars, HB | Forging annealed > 60 <= 160 mm (narrowest point) 200;Forging annealed <= 60 mm (narrowest point) 200;Forging annealed > 60 <= 160 mm (longitudinal) 200;Forging annealed <= 60 mm (longitudinal) 200;Forging annealed <= 25 mm (longitudinal) 200 |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 215.00 | 30.00 | 460.00 | 0.60 | 7.70 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
High/low temperature
| Condition | Temperature ℃ | max |
|---|---|---|
| heavy plates | sheets | 400 |
| heavy plates | sheets | 350 |
| heavy plates | sheets | 300 |
| heavy plates | sheets | 250 |
| heavy plates | sheets | 200 |
| heavy plates | sheets | 150 |
| heavy plates | sheets | 100 |
| heavy plates | sheets | 50 |
| heavy plates | sheets | 400 |
| heavy plates | sheets | 350 |
| heavy plates | sheets | 300 |
| heavy plates | sheets | 250 |
| heavy plates | sheets | 200 |
| heavy plates | sheets | 150 |
| heavy plates | sheets | 100 |
| heavy plates | sheets | 50 |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | Hardness-Tempering |
| Heat-treatment curve | CCT modified |
| Heat-treatment curve | CCT |
| Heat-treatment curve | TTT |
Similar grades
| Grade | Region | System |
|---|---|---|
| 4006-410-00-I | International standard | ISO |
| S40310 | GB | |
| 12Cr13 | GB | |
| 12Cr12 | GB | |
| S41010 | GB | |
| 1.4006 | UNI | |
| 1.4006 | UNE | |
| X 12 Cr 13 | UNE | |
| 1.4006 | STAS | |
| X 12 Cr 13 | STAS | |
| 1.4006 | SS | |
| X 12 Cr 13 | SS | |
| 1.4006 | SNV | |
| X 12 Cr 13 | SNV | |
| 1.4006 | SFS | |
| X 12 Cr 13 | SFS | |
| 1.4006 | PN | |
| X 12 Cr 13 | PN | |
| 1.4006 | ONORM | |
| X 12 Cr 13 | ONORM | |
| 1.4006 | NS | |
| X 12 Cr 13 | NS | |
| 1.4006 | NBN | |
| X 12 Cr 13 | NBN | |
| 1.4006 | MSZ | |
| X 12 Cr 13 | MSZ | |
| 1.4006 | Czech Republic | CSN |
| X 12 Cr 13 | Czech Republic | CSN |
| 1.4006 | Bulgaria | BDS |
| X 12 Cr 13 | Bulgaria | BDS |
| 1.4006 | B.S. | |
| X 12 Cr 13 | B.S. | |
| 1.4006 | AFNOR NF | |
| PK330 | Global | Enterprise standard |
| PK2 | Global | Enterprise standard |
| IMCO410 | Global | Enterprise standard |
| 410/2 OIL GRADE | Global | Enterprise standard |
| SOLEIL A2 | Global | Enterprise standard |
| AL 403 | Global | Enterprise standard |
| BÖHLER T655SC EXTRA | Global | Enterprise standard |
| BÖHLER N100 | Global | Enterprise standard |
| LESCALLOY 410Cb | Global | Enterprise standard |
| Carpenter Stainless Type 410 | Global | Enterprise standard |
| X12Cr13 | International standard | ISO |
| AISI 410 | AISI | |
| 410 | SAE | |
| 12H13 | GOST | |
| SUS 410 | JIS | |
| X 12 Cr 13 | UNI | |
| X 12 Cr 13 | AFNOR NF | |
| X15Cr13 | EN | |
| X 12 Cr 13 | DIN | |
| X15Cr13 | DIN | |
| 1.4024 | DIN | |
| 1Cr13 | GB | |
| 1Cr12 | GB |