Germany · DIN

TStE 420

DIN 17123:1997 — DIN 17123

Available suppliers

Need a supplier recommendation?

No matching listed supplier for this grade. If you need to buy or inquire, we can help route the request.

Include the grade and standard number. We will reply as soon as we can.

DIN 17103:1989DIN 17103
DIN 17179:1986Seamless circular tubes of fine grain steels for special requirements; technical delivery conditions
DIN 17102:1983DIN 17102
DIN 17178:1986Welded circular tuber of fine grain steels for special requirements; technical delivery conditions
DIN 17125:1997Square and rectangular fine grain steel tubes (hollow sections) for structural steelwork; technical delivery conditions
DIN 17123:1997DIN 17123
DIN 17124:1986DIN 17124
DIN 17123:1986DIN 17123

See a mistake? Send a correction.

Element	min	max	Similar	Remarks
Al	0.02		If nitrogen is additionally fixed by niobium	If nitrogen is additionally fixed by niobium
C		0.2
Cr		0.3
Cu		0.2	The value for Copper may be at max0	The value for Copper may be at max0
Mn	1	1.7
Mo		0.1
N		0.02
Nb		0.05
Nb+Ti+V		0.22
Ni		1
P		0.03
S		0.025
Si	0.1	0.6
Ti			The value for Ti may be at max0	The value for Ti may be at max0
V		0.2

Heat treatment / condition	Yield strength	Tensile strength	Elongation	Reduction of area	Impact energy	Hardness
steel tubes, normalized, t <=, 20 mm	≥420 Upper Yield Stress	530–680	≥21 Parallel to the tube axis		≥47 Charpy V Notch -20°C

Impact energy Kv/Ku (J)

Condition	Temperature ℃	min	Remarks
steel tubes normalized t <= 20 mm	-20	47	Charpy V Notch