Germany · DIN

TStE 355

DIN 17125:1997 — Square and rectangular fine grain steel tubes (hollow sections) for structural steelwork; technical delivery conditions

Available suppliers

Need a supplier recommendation?

No matching listed supplier for this grade. If you need to buy or inquire, we can help route the request.

Include the grade and standard number. We will reply as soon as we can.

DIN 17103:1989DIN 17103
DIN 17179:1986Seamless circular tubes of fine grain steels for special requirements; technical delivery conditions
DIN 17178:1986Welded circular tuber of fine grain steels for special requirements; technical delivery conditions
DIN 17102:1983DIN 17102
DIN 17125:1997Square and rectangular fine grain steel tubes (hollow sections) for structural steelwork; technical delivery conditions
DIN 17123:1997DIN 17123
DIN 17124:1986DIN 17124
DIN 17123:1986DIN 17123

See a mistake? Send a correction.

Element	min	max	Similar	Remarks
Al	0.02		If nitrogen is additionally fixed by niobium	If nitrogen is additionally fixed by niobium
C		0.18
Cr		0.3
Cr+Cu+Mo		0.45
Cu		0.2
Mn	0.9	1.65
Mo		0.08
N		0.02
Nb		0.05
Nb+Ti+V		0.12
Ni		0.3	The value for Nickel may be at max0	The value for Nickel may be at max0
P		0.03
S		0.025
Si	0.1	0.5
V		0.1

Heat treatment / condition	Yield strength	Tensile strength	Elongation	Reduction of area	Impact energy	Hardness
hollow bars, normalized, t <= 20 mm	≥355 Upper Yield Stress	490–630	≥22 Parallel to the tube axis		≥47 Charpy V Notch (-20°C)

Impact energy Kv/Ku (J)

Condition	Temperature ℃	min	Remarks
bars normalized t <= 20 mm	-20	47	Charpy V Notch