European Union · EN
1.4501
EN 10088-3:2005 — Stainless steels - Part 3: Technical delivery conditions for semi-finished products,bars,rods and sections for general purposes
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- solution annealed +AT · Yield strength Rp0.2
Physical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.03 | |||
| Cr | 24 | 26 | ||
| Cu | 0.5 | 1 | ||
| Mn | 1 | |||
| Mo | 3 | 4 | ||
| N | 0.2 | 0.3 | ||
| Ni | 6 | 8 | ||
| P | 0.035 | |||
| S | 0.015 | |||
| Si | 1 | |||
| W | 0.5 | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| rods, bars, wire, sections, bright products +AT, <= 160 mm | ≥530 | 730–930 | ≥25 After fracture; (trans.) | ≥100 KV (ISO-V) (trans.) | HB ≤290 |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 200.00 | 15.00 | 500.00 | 0.80 | 7.80 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
High/low temperature
| Condition | Temperature ℃ | Approx. |
|---|---|---|
| solution annealed +AT | 250 | 380 |
| solution annealed +AT | 200 | 400 |
| solution annealed +AT | 150 | 420 |
| solution annealed +AT | 100 | 450 |
Similar grades
| Grade | Region | System |
|---|---|---|
| 4501-327-60-I | International standard | ISO |
| S27603 | GB | |
| S22583 | GB | |
| 022Cr25Ni7Mo4WCuN | GB | |
| 022Cr25Ni7Mo3WCuN | GB | |
| 1.4501 | UNI | |
| X 2 CrNiMoCuWN 25 7 4 | UNI | |
| 1.4501 | UNE | |
| X 2 CrNiMoCuWN 25 7 4 | UNE | |
| 1.4501 | STAS | |
| X 2 CrNiMoCuWN 25 7 4 | STAS | |
| 1.4501 | SS | |
| X 2 CrNiMoCuWN 25 7 4 | SS | |
| 1.4501 | SNV | |
| X 2 CrNiMoCuWN 25 7 4 | SNV | |
| 1.4501 | SFS | |
| X 2 CrNiMoCuWN 25 7 4 | SFS | |
| 1.4501 | PN | |
| X 2 CrNiMoCuWN 25 7 4 | PN | |
| 1.4501 | ONORM | |
| X 2 CrNiMoCuWN 25 7 4 | ONORM | |
| 1.4501 | NS | |
| X 2 CrNiMoCuWN 25 7 4 | NS | |
| 1.4501 | NBN | |
| X 2 CrNiMoCuWN 25 7 4 | NBN | |
| 1.4501 | MSZ | |
| X 2 CrNiMoCuWN 25 7 4 | MSZ | |
| 1.4501 | Czech Republic | CSN |
| X 2 CrNiMoCuWN 25 7 4 | Czech Republic | CSN |
| 1.4501 | Bulgaria | BDS |
| X 2 CrNiMoCuWN 25 7 4 | Bulgaria | BDS |
| 1.4501 | B.S. | |
| X 2 CrNiMoCuWN 25 7 4 | B.S. | |
| 1.4501 | AFNOR NF | |
| Remanit 4501 | Global | Enterprise standard |
| BÖHLER A911SA EXTRA | Global | Enterprise standard |
| X2CrNiMoCuWN25-7-4 | International standard | ISO |
| X 2 CrNiMoCuWN 25 7 4 | AFNOR NF | |
| X 2 CrNiMoCuWN 25 7 4 | DIN | |
| 1.4501 | DIN |