European Union · EN
1.4542
EN 10088-4:2009 — EN 10088-4
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.07 | |||
| Cr | 15 | 17 | ||
| Cu | 3 | 5 | ||
| Mn | 1.5 | |||
| Mo | 0.6 | |||
| Nb | 0.45 | >= 5 x %C | ||
| Ni | 3 | 5 | ||
| P | 0.04 | |||
| S | 0.015 | For machinability %S=0 | ||
| Si | 0.7 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| cold-rolled strip +AT, t < 8mm | ≤1275 | ≥5 Elongation after fracture; for t < 3mm and Lo=80mm or for t >= 3mm and Lo=50mm; | ||||
| cold-rolled strip +P1300, t < 8mm | ≥1150 | ≥1300 | ≥3 Elongation after fracture; for t < 3mm and Lo=80mm or for t >= 3mm and Lo=50mm; | |||
| cold-rolled strip +P900, t < 8mm | ≥700 | ≥900 | ≥6 Elongation after fracture; for t < 3mm and Lo=80mm or for t >= 3mm and Lo=50mm; | |||
| hot-rolled heavy plate +P1070, t < 50mm | ≥1000 | 1070–1270 | ≥8 Elongation after fracture; for t < 3mm and Lo=80mm or for t >= 3mm and Lo=50mm; Long. + tr. direction. | |||
| hot-rolled heavy plate +P850, t < 50mm | ≥600 | 850–1050 | ≥12 Elongation after fracture; for t < 3mm and Lo=80mm; Amin.=12% for t >= 3mm and Lo=50mm; Long. + tr. direction. | |||
| hot-rolled heavy plate +P950, t < 50mm | ≥800 | 950–1150 | ≥10 Elongation after fracture; for t < 3mm and Lo=80mm; Amin.=10% for t >= 3mm and Lo=50mm; Long. + tr. direction. | |||
| hot-rolled heavy plate +SR630, t < 50mm | ≤1050 |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 200.00 | 16.00 | 500.00 | 0.71 | 7.80 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | CCT |
Similar grades
| Grade | Region | System |
|---|---|---|
| 4542-174-00-I | International standard | ISO |
| S51740 | GB | |
| 05Cr17Ni4Cu4Nb | GB | |
| A564 S17400 | ASTM | |
| A693 S17400 | ASTM | |
| 1.4542 | UNI | |
| X 5 CrNiCuNb 16 4 | UNI | |
| 1.4542 | UNE | |
| X 5 CrNiCuNb 16 4 | UNE | |
| 1.4542 | STAS | |
| X 5 CrNiCuNb 16 4 | STAS | |
| 1.4542 | SS | |
| X 5 CrNiCuNb 16 4 | SS | |
| 1.4542 | SNV | |
| X 5 CrNiCuNb 16 4 | SNV | |
| 1.4542 | SFS | |
| X 5 CrNiCuNb 16 4 | SFS | |
| 1.4542 | PN | |
| X 5 CrNiCuNb 16 4 | PN | |
| 1.4542 | ONORM | |
| X 5 CrNiCuNb 16 4 | ONORM | |
| 1.4542 | NS | |
| X 5 CrNiCuNb 16 4 | NS | |
| 1.4542 | NBN | |
| X 5 CrNiCuNb 16 4 | NBN | |
| 1.4542 | MSZ | |
| X 5 CrNiCuNb 16 4 | MSZ | |
| 1.4542 | Czech Republic | CSN |
| X 5 CrNiCuNb 16 4 | Czech Republic | CSN |
| 1.4542 | Bulgaria | BDS |
| X 5 CrNiCuNb 16 4 | Bulgaria | BDS |
| 1.4542 | B.S. | |
| X 5 CrNiCuNb 16 4 | B.S. | |
| 1.4542 | AFNOR NF | |
| PK346 | Global | Enterprise standard |
| EskyLos 4542 | Global | Enterprise standard |
| Remanit 4542 | Global | Enterprise standard |
| IMCO630 | Global | Enterprise standard |
| VIRGO 17.4 PH | Global | Enterprise standard |
| BÖHLER N700 ISOEXTRA | Global | Enterprise standard |
| Project 70+ Custom 630 Stainless | Global | Enterprise standard |
| Carpenter Stainless Custom 630 | Global | Enterprise standard |
| Carpenter Stainless 17Cr-4Ni | Global | Enterprise standard |
| X5CrNiCuNb16-4 | International standard | ISO |
| S17400 | UNS | |
| 17-4PH | SAE | |
| X 5 CrNiCuNb 16 4 | AFNOR NF | |
| X 5 CrNiCuNb 16 4 | DIN | |
| 1.4542 | DIN |