Australia · AS
HA1
AS/NZS 1594:2002 — AS/NZS 1594
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| B | 0.015 | |||
| C | 0.13 | |||
| Cr | 0.15 | |||
| Cr+Ni+Cu+M | 0.3 | |||
| Cu | 0.15 | |||
| Mn | 0.5 | |||
| Mo | 0.05 | |||
| Nb | 0.01 | |||
| Ni | 0.15 | |||
| P | 0.04 | |||
| S | 0.03 | |||
| Si | 0.03 | |||
| Ti | 0.04 | |||
| V+Nb | 0.03 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| heavy plate, steel strip, hot rolled, <= 3 mm, sheet | 200 | 300 | 24 | |||
| heavy plate, steel strip, hot rolled, > 3 mm, sheet | 200 | 300 | 28 |