Romania · STAS
1.8901
SR EN 10025-3
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- hot-rolled products normalized ( transverse ) · Impact energy Kv/Ku
- hot-rolled products normalized ( longitudinal ) · Impact energy Kv/Ku
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 0.015 | If sufficient nitrogen-binding elemets are present | ||
| C | 0.22 | |||
| CEV | 0.53 | for t <= 63mm; CEV = max.0.54 for 63 < t <= 100mm; CEV = max.0.55 for 100 < t <= 250mm | ||
| Cr | 0.35 | |||
| Cr+Mo | 0.38 | |||
| Cu | 0.6 | Cu content above 0 | ||
| Mn | 0.95 | 1.8 | ||
| Mo | 0.13 | |||
| N | 0.027 | |||
| Nb | 0.06 | |||
| Ni | 0.85 | |||
| P | 0.035 | For long products the P content can be 0 | ||
| S | 0.03 | For long products the S content can be 0 | ||
| Si | 0.65 | |||
| Ti | 0.06 | |||
| V | 0.22 | |||
| V+Nb+Ti | 0.26 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| hot rolled , normalized, 100.0 < t <= 150.0 mm | ≥380 | 530–710 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized, 150.0 < t <= 200.0 mm | ≥370 | 530–710 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized, 16.0 < t <= 40.0 mm | ≥440 | 540–720 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized, 40.0 < t <= 63.0 mm | ≥430 | 540–720 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized, 63.0 < t <= 80.0 mm | ≥410 | 540–720 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized, 80.0 < t <= 100.0 mm | ≥400 | 540–720 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized, t <= 16.0 mm | ≥460 | 540–720 | ≥17 Lo=5.65√So | |||
| hot rolled , normalized | ≥20 Charpy V Notch (-20°C);≥24 Charpy V Notch (-10°C);≥27 Charpy V Notch (0°C);≥31 Charpy V Notch (20°C);≥40 Charpy V Notch (-20°C); Corresponds with 27J at -30°C;≥43 Charpy V Notch (-10°C);≥47 Charpy V Notch (0°C);≥55 Charpy V Notch (20°C) |
High/low temperature
| Condition | Temperature ℃ | min | Remarks |
|---|---|---|---|
| hot-rolled products normalized ( transverse ) | -10 | 24 | Charpy V Notch |
| hot-rolled products normalized ( transverse ) | -20 | 20 | Charpy V Notch |
| hot-rolled products normalized ( longitudinal ) | -10 | 43 | Charpy V Notch |
| hot-rolled products normalized ( longitudinal ) | -20 | 40 | Charpy V Notch; Coresponds to 27J at (-30°C) |