Sweden · SS
1.5680
SS EN 10216-4
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T · Impact energy Kv/Ku
- Seamless tubes normalized and tempered +NT T <= 25 mm +T · Impact energy Kv/Ku
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.15 | |||
| Cu | 0.3 | In order to facilitate subsequent forming operation | ||
| Mn | 0.3 | 0.8 | ||
| Ni | 4.5 | 5.3 | ||
| P | 0.02 | |||
| S | 0.01 | |||
| Si | 0.35 | |||
| V | 0.05 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Seamless tubes;25 < t ≤ 40 mm +NT | ≥70 KV (20°C);≥65 KV (-20°C);≥65 KV (-40°C);≥65 KV (-50°C);≥60 KV (-60°C);≥50 KV (-90°C);≥45 KV (-100°C);≥40 KV (-110°C) | |||||
| Seamless tubes;t ≤ 25 mm +NT | ≥390 Upper yield stress is proof stress | 510–710 | ≥21 Long. direction | ≥70 KV (20°C);≥70 KV (-20°C);≥65 KV (-40°C);≥65 KV (-50°C);≥65 KV (-60°C);≥55 KV (-90°C);≥50 KV (-100°C);≥45 KV (-110°C);≥40 KV (-120°C) | ||
| Seamless tubes;t ≤ 25 mm +QT | ≥390 Upper yield stress is proof stress | 510–710 | ≥21 Long. direction | ≥40 KV (-120°C) |
High/low temperature
| Condition | Temperature ℃ | min | Remarks |
|---|---|---|---|
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -20 | 65 | KV |
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -40 | 65 | KV |
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -50 | 65 | KV |
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -60 | 60 | KV |
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -90 | 50 | KV |
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -100 | 45 | KV |
| Seamless tubes normalized and tempered +NT 25 < T <= 40 mm +T | -110 | 40 | KV |
| Seamless tubes quenched and tempered +QT T <= 25 mm +T | -120 | 40 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -20 | 70 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -40 | 65 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -50 | 65 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -60 | 65 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -90 | 55 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -100 | 50 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -110 | 45 | KV |
| Seamless tubes normalized and tempered +NT T <= 25 mm +T | -120 | 40 | KV |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | CCT |
| Heat-treatment curve | TTT |