France · AFNOR NF

1.4462

NF EN 10263-5

Available suppliers

Need a supplier recommendation?

No matching listed supplier for this grade. If you need to buy or inquire, we can help route the request.

Include the grade and standard number. We will reply as soon as we can.

NF EN 10088-3Stainless steels. Part 3 : technical delivery conditions for semi-finished products, bars, rods, and sections for general purposes.
NF EN 10088-5NF EN 10088-5
NF EN 10028-7NF EN 10028-7
NF EN 10088-2NF EN 10088-2
NF EN 10263-5NF EN 10263-5
NF EN 10088-4NF EN 10088-4
NF EN 10222-5NF EN 10222-5
NF EN 10250-4NF EN 10250-4
NF EN 10216-5:2004NF EN 10216-5
NF EN 10217-7NF EN 10217-7
NF EN 10253-4NF EN 10253-4
NF EN 10272NF EN 10272
NF EN 10253-3NF EN 10253-3
NF EN 10296-2:2005NF EN 10296-2
NF EN 10297-2:2005NF EN 10297-2
NF EN 10088-1NF EN 10088-1

See a mistake? Send a correction.

wt% · log scale

value range by condition

vs. temperature

Elastic modulus GPa

Mean thermal expansion 10⁻⁶/K

Element	min	max	Remarks
C		0.03
Cr	21	23
Mn		2
Mo	2.5	3.5
N	0.1	0.22	At the time of the enquiry and order a minimum content of N of 0
Ni	4.5	6.5
P		0.035
S		0.015
Si		1

Heat treatment / condition	Tensile strength	Reduction of area
bars, wire +AT+C, > 10 <= 25 mm, steel bars	1000.00
bars, wire +AT+C, > 5 <= 10 mm, steel bars	1020.00
bars, wire +AT+C+AT, > 10 <= 25 mm, steel bars	880.00	55
bars, wire +AT+C+AT, > 2 <= 5 mm, steel bars	950.00	55
bars, wire +AT+C+AT, > 5 <= 10 mm, steel bars	900.00	55
bars, wire +AT+C+AT+LC, > 2 <= 5 mm, steel bars	1010.00	50
bars, wire +AT+C+AT+LC, > 5 <= 10 mm, steel bars	970.00	50
bars, wire, solution annealed or solution annealed , > 2 <= 25 mm, steel bars	880.00	55

Temperature

20.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
200.00；205.00		15.00	500.00	0.80	7.80

100.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
194.00	13.00

200.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
186.00	13.50

300.0

Elastic modulus	Mean thermal expansion	Thermal conductivity	Specific heat	Resistivity	Density	Poisson's ratio
180.00	14.00

Density	Elastic modulus	Poisson's ratio	Remarks
7.61–8.10	190.00–215.00	0.27–0.30	Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design.
7.86	190.00–210.00	0.27–0.30	Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design.