Poland · PN

1.4563

PN EN 10216-5:2004 — PN EN 10216-5

Chemical composition

wt% · log scale
0.0010.010.1110100C0.02Cr26 – 28Cu0.7 – 1.5Mn2Mo3 – 4N0.11Ni30 – 32P0.03S0.01Si0.7
  • min – max range
  • typical value

Mechanical properties

value range by condition
Yield strength Rp0.2≥215 MPaTensile strength Rm500–750 MPaImpact energy Kv/Ku≥120 JElongation A≥40 %

High / low temperature

value vs. temperature
10413316319222150100150200250300350400450500550°C
  • Seamless tubes solution annealed +AT <= 60 mm · Yield strength Rp0.2

Physical properties

vs. temperature
Elastic modulus GPa
158 – 195°C
Mean thermal expansion 10⁻⁶/K
15.8 – 17.3°C

Chemical composition

ElementminmaxSimilarRemarks
C0.02
Cr2628
Cu0.71.5
Mn2
Mo34
N0.11
Ni3032
P0.03
S0.01
Si0.7

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
Seamless tubes +AT, t <= 60 mm≥215500–750≥40 For long.direction;Amin.=35% for trans.direction≥120 Charpy V Notch (20°C)

Physical properties

20.0

Elastic modulusMean thermal expansionThermal conductivitySpecific heatResistivityDensityPoisson's ratio
195.0012.00450.001.008.00

Typical physical values

DensityElastic modulusPoisson's ratioRemarks
7.61–8.10190.00–215.000.27–0.30Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design.
7.86190.00–210.000.27–0.30Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design.

High/low temperature

Yield strength Rp0.2 (MPa)
ConditionTemperature ℃Approx.
Seamless tubes solution annealed +AT <= 60 mm550115
Seamless tubes solution annealed +AT <= 60 mm500120
Seamless tubes solution annealed +AT <= 60 mm450125
Seamless tubes solution annealed +AT <= 60 mm400135
Seamless tubes solution annealed +AT <= 60 mm350145
Seamless tubes solution annealed +AT <= 60 mm300150
Seamless tubes solution annealed +AT <= 60 mm250155
Seamless tubes solution annealed +AT <= 60 mm200160
Seamless tubes solution annealed +AT <= 60 mm150175
Seamless tubes solution annealed +AT <= 60 mm100190
Seamless tubes solution annealed +AT <= 60 mm50210
Impact energy Kv/Ku (J)
ConditionTemperature ℃minRemarks
Seamless tubes solution annealed +AT-19660Charpy V Notch

Similar grades

GradeRegionSystem
1.4563ItalyUNI
X 1 NiCrMoCu 31 27 4ItalyUNI
1.4563SpainUNE
X 1 NiCrMoCu 31 27 4SpainUNE
1.4563RomaniaSTAS
X 1 NiCrMoCu 31 27 4RomaniaSTAS
1.4563SwedenSS
X 1 NiCrMoCu 31 27 4SwedenSS
1.4563SwitzerlandSNV
X 1 NiCrMoCu 31 27 4SwitzerlandSNV
1.4563FinlandSFS
X 1 NiCrMoCu 31 27 4FinlandSFS
X 1 NiCrMoCu 31 27 4PolandPN
1.4563AustriaONORM
X 1 NiCrMoCu 31 27 4AustriaONORM
1.4563NorwayNS
X 1 NiCrMoCu 31 27 4NorwayNS
1.4563BelgiumNBN
X 1 NiCrMoCu 31 27 4BelgiumNBN
1.4563HungaryMSZ
X 1 NiCrMoCu 31 27 4HungaryMSZ
1.4563Czech RepublicCSN
X 1 NiCrMoCu 31 27 4Czech RepublicCSN
1.4563BulgariaBDS
X 1 NiCrMoCu 31 27 4BulgariaBDS
1.4563United KingdomB.S.
X 1 NiCrMoCu 31 27 4United KingdomB.S.
1.4563FranceAFNOR NF
X 1 NiCrMoCu 31 27 4FranceAFNOR NF
X 1 NiCrMoCu 31 27 4GermanyDIN
1.4563GermanyDIN