Spain · UNE
1.4436
UNE EN 10222-5
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- Condition not stated · Yield strength Rp0.2
- Condition not stated · Tensile strength Rm
Physical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.05 | |||
| Cr | 16.5 | 18.5 | ||
| Mn | 2 | |||
| Mo | 2.5 | 3 | ||
| N | 0.11 | |||
| Ni | 10.5 | 13 | ||
| P | 0.045 | |||
| S | 0.015 | For products to be machined a controlled sulfur content of 0 | ||
| Si | 1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| forgings, Solution treated, <= 250 mm | ≥205 | 510–710 | ≥35;≥45 | ≥60 Charpy V Notch; > 10 <= 250 mm;≥100 Charpy V Notch; > 10 <= 250 mm |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 200.00 | 15.00 | 500.00 | 0.75 | 8.00 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
High/low temperature
| Temperature ℃ | Approx. |
|---|---|
| 500 | 110 |
| 400 | 115 |
| 350 | 120 |
| 300 | 127 |
| 250 | 137 |
| 200 | 147 |
| 150 | 162 |
| 100 | 177 |
| Temperature ℃ | Approx. |
|---|---|
| 500 | 390 |
| 400 | 410 |
| 350 | 410 |
| 300 | 410 |
| 250 | 415 |
| 200 | 420 |
| 150 | 440 |
| 100 | 460 |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.4436 | UNI | |
| X 3 CrNiMo 17 13 3 | UNI | |
| X 3 CrNiMo 17 13 3 | UNE | |
| 1.4436 | STAS | |
| X 3 CrNiMo 17 13 3 | STAS | |
| 1.4436 | SS | |
| X 3 CrNiMo 17 13 3 | SS | |
| 1.4436 | SNV | |
| X 3 CrNiMo 17 13 3 | SNV | |
| 1.4436 | SFS | |
| X 3 CrNiMo 17 13 3 | SFS | |
| 1.4436 | PN | |
| X 3 CrNiMo 17 13 3 | PN | |
| 1.4436 | ONORM | |
| X 3 CrNiMo 17 13 3 | ONORM | |
| 1.4436 | NS | |
| X 3 CrNiMo 17 13 3 | NS | |
| 1.4436 | NBN | |
| X 3 CrNiMo 17 13 3 | NBN | |
| 1.4436 | MSZ | |
| X 3 CrNiMo 17 13 3 | MSZ | |
| 1.4436 | Czech Republic | CSN |
| X 3 CrNiMo 17 13 3 | Czech Republic | CSN |
| 1.4436 | Bulgaria | BDS |
| X 3 CrNiMo 17 13 3 | Bulgaria | BDS |
| 1.4436 | B.S. | |
| X 3 CrNiMo 17 13 3 | B.S. | |
| 1.4436 | AFNOR NF | |
| X 3 CrNiMo 17 13 3 | AFNOR NF | |
| X 3 CrNiMo 17 13 3 | DIN | |
| 1.4436 | DIN |