Italy · UNI

C 40 R

UNI EN 10083-1 — Steels for quenching and tempering - Part 1 : general technical delivery conditions

Chemical composition

wt% · log scale
0.010.1110C0.37 – 0.44Cr0.4Cr+Mo+Ni0.63Mn0.5 – 0.8Mo0.1Ni0.4P0.035S0.02 – 0.04Si0.4
  • min – max range
  • typical value

Mechanical properties

value range by condition
Yield strength Rp0.2260.00Tensile strength Rm530.00Elongation A17.00bars, open die forgings and die forgings +N, 100 mm < d <= 250 mm, flatsYield strength Rp0.2290.00Tensile strength Rm550.00Elongation A17.00bars, open die forgings and die forgings +N, 16 mm < d <= 100 mm, flatsYield strength Rp0.2320.00Tensile strength Rm580.00Elongation A16.00bars, open die forgings and die forgings +N, d <= 16 mm or t <= 16 mm, flatsYield strength Rp0.2T - thickness)Tensile strength RmT - thickness)Impact energy Kv/KuT - thickness)Elongation AT - thickness)Reduction of area ZT - thickness)bars, open die forgings and die forgings +QT, 16 < d +MM < 40 or 8 < t +MM <= 20

Chemical composition

ElementminmaxSimilarRemarks
C0.370.44
Cr0.4
Cr+Mo+Ni0.63If steels are ordered without mechanical requirements in the quenched and tempered or normalized condition
Mn0.50.8
Mo0.1
Ni0.4
P0.035
S0.020.04Steels with improved machinability as a result of the addition of lead or higher sulphur contents up to around 0
Si0.4

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
bars, open die forgings and die forgings +N, 100 mm < d <= 250 mm, flats260.00530.0017.00
bars, open die forgings and die forgings +N, 16 mm < d <= 100 mm, flats290.00550.0017.00
bars, open die forgings and die forgings +N, d <= 16 mm or t <= 16 mm, flats320.00580.0016.00
bars, open die forgings and die forgings +QT, 16 < d +MM < 40 or 8 < t +MM <= 20T - thickness)T - thickness)T - thickness)T - thickness)T - thickness)
bars, open die forgings and die forgings +QT, 40 < d +MM < 100 or 20 < t +MM <= 60T - thickness)T - thickness)T - thickness)T - thickness)T - thickness)
bars, open die forgings and die forgings +QT, d <= 16 mm or t <= 8 mmT - thickness)T - thickness)T - thickness)T - thickness)T - thickness)

Heat treatment

Type1
Heat-treatment curveHardness-Tempering
Heat-treatment curveCCT
Heat-treatment curveHardenability