Hungary · MSZ
1.4523
MSZ EN 10088-3
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.03 | |||
| C+N | 0.04 | |||
| Cr | 17.5 | 19 | ||
| Mn | 0.5 | |||
| Mo | 2 | 2.5 | ||
| N | C + N < 0.04% | |||
| P | 0.04 | |||
| S | 0.15 | 0.35 | ||
| Si | 1 | |||
| Ti | 0.3 | 0.8 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| rods, bars, wire, sections, bright products, annealed, <= 100 mm | ≥280 | 430–600 | ≥15 After fracture; (trans.) | HB ≤200 |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 220.00 | 23.00 | 430.00 | 0.80 | 7.70 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
High/low temperature
| Condition | Temperature ℃ | Approx. |
|---|---|---|
| bars | wire rod | 400 |
| bars | wire rod | 350 |
| bars | wire rod | 300 |
| bars | wire rod | 250 |
| bars | wire rod | 200 |
| bars | wire rod | 150 |
| bars | wire rod | 100 |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.4523 | UNI | |
| X 2 CrMoTiS 18 2 | UNI | |
| 1.4523 | UNE | |
| X 2 CrMoTiS 18 2 | UNE | |
| 1.4523 | STAS | |
| X 2 CrMoTiS 18 2 | STAS | |
| 1.4523 | SS | |
| X 2 CrMoTiS 18 2 | SS | |
| 1.4523 | SNV | |
| X 2 CrMoTiS 18 2 | SNV | |
| 1.4523 | SFS | |
| X 2 CrMoTiS 18 2 | SFS | |
| 1.4523 | PN | |
| X 2 CrMoTiS 18 2 | PN | |
| 1.4523 | ONORM | |
| X 2 CrMoTiS 18 2 | ONORM | |
| 1.4523 | NS | |
| X 2 CrMoTiS 18 2 | NS | |
| 1.4523 | NBN | |
| X 2 CrMoTiS 18 2 | NBN | |
| X 2 CrMoTiS 18 2 | MSZ | |
| 1.4523 | Czech Republic | CSN |
| X 2 CrMoTiS 18 2 | Czech Republic | CSN |
| 1.4523 | Bulgaria | BDS |
| X 2 CrMoTiS 18 2 | Bulgaria | BDS |
| 1.4523 | B.S. | |
| X 2 CrMoTiS 18 2 | B.S. | |
| 1.4523 | AFNOR NF | |
| X 2 CrMoTiS 18 2 | AFNOR NF | |
| X 2 CrMoTiS 18 2 | DIN | |
| 1.4523 | DIN |