Finland · SFS
NiCr28FeSiCe
SFS EN 10095
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureCreep properties
- 10000.0h
- 100000.0h
Temperature °C · time at rupture
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.05 | 0.12 | ||
| Ce | 0.03 | 0.09 | ||
| Co | A maximum of 1 | |||
| Cr | 26 | 29 | ||
| Cu | 0.3 | |||
| Mn | 1 | |||
| Ni | 45 | |||
| P | 0.02 | |||
| S | 0.01 | |||
| Si | 2.5 | 3 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Flat products +AT, <= 50 mm | ≥240 | 620–820 | ≥35 For 0.5 ≤ t < 3.0mm;≥35 For t ≥ 3 mm | HB ≤220 For guidance only. | ||
| bars +AT, <= 160 mm | ≥240 | 620–820 | ≥35 | HB ≤220 For guidance only. |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 13.00 | 500.00 | 1.18 | 8.00 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.90–8.80 | 185.00–205.00 | 0.32–0.34 | Nickel alloy:incoalloy |
| 7.80 | 190.00–210.00 | 0.27–0.30 | Material properties for electrical steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
Creep
| Temperature ℃ | Time h | Rp1 | CRS |
|---|---|---|---|
| 700 | 10000.0h | 25.0 | 40.0 |
| 700 | 100000.0h | 16.0 | 28.0 |
| 800 | 10000.0h | 11.9 | 19.0 |
| 800 | 100000.0h | 7.2 | 13.0 |
| 900 | 10000.0h | 5.9 | 9.5 |
| 900 | 100000.0h | 3.5 | 5.9 |
| 1000 | 10000.0h | 3.1 | 5.9 |
| 1000 | 100000.0h | 1.9 | 3.0 |
Similar grades
| Grade | Region | System |
|---|---|---|
| 2.4889 | UNI | |
| NiCr28FeSiCe | UNI | |
| 2.4889 | UNE | |
| NiCr28FeSiCe | UNE | |
| 2.4889 | STAS | |
| NiCr28FeSiCe | STAS | |
| 2.4889 | SS | |
| NiCr28FeSiCe | SS | |
| 2.4889 | SNV | |
| NiCr28FeSiCe | SNV | |
| 2.4889 | SFS | |
| 2.4889 | PN | |
| NiCr28FeSiCe | PN | |
| 2.4889 | ONORM | |
| NiCr28FeSiCe | ONORM | |
| 2.4889 | NS | |
| NiCr28FeSiCe | NS | |
| 2.4889 | NBN | |
| NiCr28FeSiCe | NBN | |
| 2.4889 | MSZ | |
| NiCr28FeSiCe | MSZ | |
| 2.4889 | Czech Republic | CSN |
| NiCr28FeSiCe | Czech Republic | CSN |
| 2.4889 | B.S. | |
| NiCr28FeSiCe | B.S. | |
| 2.4889 | AFNOR NF | |
| NiCr28FeSiCe | AFNOR NF | |
| NiCr28FeSiCe | DIN | |
| 2.4889 | DIN |