France · AFNOR NF

1.0619

NF EN 10213-2

Chemical composition

wt% · log scale
0.010.1110C0.18 – 0.23Mn0.5 – 1.2P0.03S0.02Si0.6
  • min – max range
  • typical value

Mechanical properties

value range by condition
Yield strength Rp0.2≥240 MPaTensile strength Rm420–600 MPaImpact energy Kv/Ku≥27 JElongation A≥22 %castings +N, <= 100 mmYield strength Rp0.2≥240 MPaTensile strength Rm420–600 MPaImpact energy Kv/Ku≥40 JElongation A≥22 %castings +QT, <= 100 mm

High / low temperature

value vs. temperature
115141168194220100200300350400450°C
  • castings normalized or quenched and tempered <= 100 mm · Yield strength Rp0.2

Physical properties

vs. temperature
Mean thermal expansion 10⁻⁶/K
12.6 – 14.0°C

Creep properties

11.264.9119172226400450500MPa
  • 10000.0h
  • 100000.0h
  • 200000.0h

Temperature °C · time at rupture

Chemical composition

ElementminmaxSimilarRemarks
C0.180.23
Mn0.51.2
P0.03
S0.02For castings of ruling thickness <28 mm
Si0.6

Mechanical properties

Heat treatment / conditionYield strengthTensile strengthElongationReduction of areaImpact energyHardness
castings +N, <= 100 mm≥240420–600≥22≥27 KV; Min. impact energy values of 40J may be agreed.
castings +QT, <= 100 mm≥240420–600≥22≥40 KV; Min. impact energy values of 40J may be agreed.

Physical properties

20.0

Elastic modulusMean thermal expansionThermal conductivitySpecific heatResistivityDensityPoisson's ratio
460.007.80

Typical physical values

DensityElastic modulusPoisson's ratioRemarks
7.86203.000.27–0.30Typical properties for low-carbon, low-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design.

High/low temperature

Yield strength Rp0.2 (MPa)
ConditionTemperature ℃Approx.
castings normalized or quenched and tempered <= 100 mm450125
castings normalized or quenched and tempered <= 100 mm400130
castings normalized or quenched and tempered <= 100 mm350135
castings normalized or quenched and tempered <= 100 mm300145
castings normalized or quenched and tempered <= 100 mm200175
castings normalized or quenched and tempered <= 100 mm100210

Creep

Temperature ℃Time hRp1CRS
40010000.0h147.0205.0
400100000.0h110.0160.0
400200000.0h145.0
45010000.0h88.0132.0
450100000.0h50.083.0
450200000.0h71.0
50010000.0h43.074.0
500100000.0h20.040.0
500200000.0h32.0

Similar grades

GradeRegionSystem
1.0625ItalyUNI
1.0619ItalyUNI
GP 280 GHItalyUNI
GP 240 GHItalyUNI
1.0625SpainUNE
1.0619SpainUNE
GP 280 GHSpainUNE
GP 240 GHSpainUNE
1.0625RomaniaSTAS
1.0619RomaniaSTAS
GP 280 GHRomaniaSTAS
GP 240 GHRomaniaSTAS
1.0625SwedenSS
1.0619SwedenSS
GP 280 GHSwedenSS
GP 240 GHSwedenSS
1.0625SwitzerlandSNV
1.0619SwitzerlandSNV
GP 280 GHSwitzerlandSNV
GP 240 GHSwitzerlandSNV
1.0625FinlandSFS
1.0619FinlandSFS
GP 280 GHFinlandSFS
GP 240 GHFinlandSFS
1.0625PolandPN
1.0619PolandPN
GP 280 GHPolandPN
GP 240 GHPolandPN
1.0625AustriaONORM
1.0619AustriaONORM
GP 280 GHAustriaONORM
GP 240 GHAustriaONORM
1.0625NorwayNS
1.0619NorwayNS
GP 280 GHNorwayNS
GP 240 GHNorwayNS
1.0625BelgiumNBN
1.0619BelgiumNBN
GP 280 GHBelgiumNBN
GP 240 GHBelgiumNBN
1.0625HungaryMSZ
1.0619HungaryMSZ
GP 280 GHHungaryMSZ
GP 240 GHHungaryMSZ
1.0625Czech RepublicCSN
1.0619Czech RepublicCSN
GP 280 GHCzech RepublicCSN
GP 240 GHCzech RepublicCSN
1.0625BulgariaBDS
1.0619BulgariaBDS
GP 280 GHBulgariaBDS
GP 240 GHBulgariaBDS
1.0625United KingdomB.S.
1.0619United KingdomB.S.
GP 280 GHUnited KingdomB.S.
GP 240 GHUnited KingdomB.S.
1.0625FranceAFNOR NF
GP 280 GHFranceAFNOR NF
GP 240 GHFranceAFNOR NF
GP 280 GHGermanyDIN
GP 240 GHGermanyDIN
1.0625GermanyDIN
1.0619GermanyDIN