Sweden · SS
1.6982
SS EN 10213
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionPhysical properties
vs. temperatureChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.06 | |||
| Cr | 12 | 13.5 | ||
| Cu | 0.3 | |||
| Mn | 1 | |||
| Mo | 0.7 | |||
| Ni | 3.5 | 5 | ||
| P | 0.035 | |||
| S | 0.025 | |||
| Si | 1 | |||
| V | 0.08 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| castings, 1/4hardened | ≥27 Charpy V Notch (-120°C) | |||||
| castings +QT, <= 300 mm | ≥550 | 760–960 | ≥15 | ≥27 Charpy V Notch (20°C) |
Physical properties
20.0
| Elastic modulus | Mean thermal expansion | Thermal conductivity | Specific heat | Resistivity | Density | Poisson's ratio |
|---|---|---|---|---|---|---|
| 460.00 | 7.70 |
Typical physical values
| Density | Elastic modulus | Poisson's ratio | Remarks |
|---|---|---|---|
| 7.61–8.10 | 190.00–215.00 | 0.27–0.30 | Typical material properties for stainless steel. These values are not taken from the standard; they are indicative and must not be used for design. |
| 7.86 | 190.00–210.00 | 0.27–0.30 | Material properties for low-carbon, high-alloy steel. These values are not taken from the standard; they are indicative and must not be used for design. |
High/low temperature
| Condition | Temperature ℃ | min | Remarks |
|---|---|---|---|
| castings 1/4 (1/4H) | -120 | 27 | Charpy V Notch |
Similar grades
| Grade | Region | System |
|---|---|---|
| 1.6982 | UNI | |
| GX 3 CrNi 13 4 | UNI | |
| 1.6982 | UNE | |
| GX 3 CrNi 13 4 | UNE | |
| 1.6982 | STAS | |
| GX 3 CrNi 13 4 | STAS | |
| GX 3 CrNi 13 4 | SS | |
| 1.6982 | SNV | |
| GX 3 CrNi 13 4 | SNV | |
| 1.6982 | SFS | |
| GX 3 CrNi 13 4 | SFS | |
| 1.6982 | PN | |
| GX 3 CrNi 13 4 | PN | |
| 1.6982 | ONORM | |
| 1.6982 | NS | |
| GX 3 CrNi 13 4 | NS | |
| 1.6982 | NBN | |
| GX 3 CrNi 13 4 | NBN | |
| 1.6982 | MSZ | |
| GX 3 CrNi 13 4 | MSZ | |
| 1.6982 | Czech Republic | CSN |
| GX 3 CrNi 13 4 | Czech Republic | CSN |
| 1.6982 | Bulgaria | BDS |
| GX 3 CrNi 13 4 | Bulgaria | BDS |
| 1.6982 | B.S. | |
| GX 3 CrNi 13 4 | B.S. | |
| 1.6982 | AFNOR NF | |
| 1.4317 | UNI | |
| GX 4 CrNi 13-4 | UNI | |
| 1.4317 | UNE | |
| GX 4 CrNi 13-4 | UNE | |
| 1.4317 | STAS | |
| GX 4 CrNi 13-4 | STAS | |
| 1.4317 | SS | |
| GX 4 CrNi 13-4 | SS | |
| 1.4317 | SNV | |
| GX 4 CrNi 13-4 | SNV | |
| 1.4317 | SFS | |
| GX 4 CrNi 13-4 | SFS | |
| 1.4317 | PN | |
| GX 4 CrNi 13-4 | PN | |
| 1.4317 | ONORM | |
| GX 4 CrNi 13-4 | ONORM | |
| 1.4317 | NS | |
| GX 4 CrNi 13-4 | NS | |
| 1.4317 | NBN | |
| GX 4 CrNi 13-4 | NBN | |
| 1.4317 | MSZ | |
| GX 4 CrNi 13-4 | MSZ | |
| 1.4317 | Czech Republic | CSN |
| GX 4 CrNi 13-4 | Czech Republic | CSN |
| 1.4317 | Bulgaria | BDS |
| GX 4 CrNi 13-4 | Bulgaria | BDS |
| 1.4317 | B.S. | |
| GX 4 CrNi 13-4 | B.S. | |
| 1.4317 | AFNOR NF | |
| GX 3 CrNi 13 4 | ONORM | |
| GX 3 CrNi 13 4 | AFNOR NF | |
| GX 3 CrNi 13 4 | DIN | |
| 1.6982 | DIN |