Italy · UNI
1.5414
UNI EN 10028-2 — Flat products made of steels for pressure purposes. Part 2:Non-alloy and alloy steels with specified elevated temperature properties
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- Flat products 150 < t <= 250 mm · Yield strength Rp0.2
- Flat products 60 < t <= 150 mm · Yield strength Rp0.2
- Flat products t <= 60 mm · Yield strength Rp0.2
Creep properties
- 10000.0h
- 100000.0h
Temperature °C · time at rupture
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | Shall be determined and given in the inspection document | |||
| C | 0.2 | |||
| Cr | 0.3 | |||
| Cu | 0.3 | A lower max.Cu and/or Cu+6Sn<=0 | ||
| Mn | 0.9 | 1.5 | ||
| Mo | 0.45 | 0.6 | ||
| N | 0.012 | |||
| Ni | 0.3 | |||
| P | 0.015 | |||
| S | 0.005 | |||
| Si | 0.4 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| Flat products +N, t <= 150 mm | ≥40 KV (0°C);≥34 KV (0°C);≥27 KV (-20°C) | |||||
| Flat products +NT, 60 < t <= 150 mm | ≥325 | 510–650 | ≥20 after fracture | |||
| Flat products +NT, t <= 60 mm | ≥345 | 510–650 | ≥20 after fracture | |||
| Flat products +QT, 150 < t <= 250 mm | ≥310 | 480–620 | ≥20 after fracture | |||
| Flat products +QT, t <= 250 mm | ≥40 KV (0°C);≥34 KV (0°C);≥27 KV (-20°C) |
High/low temperature
| Condition | Temperature ℃ | min |
|---|---|---|
| Flat products 150 < t <= 250 mm | 450 | 200 |
| Flat products 150 < t <= 250 mm | 400 | 220 |
| Flat products 150 < t <= 250 mm | 350 | 245 |
| Flat products 150 < t <= 250 mm | 300 | 265 |
| Flat products 150 < t <= 250 mm | 250 | 275 |
| Flat products 150 < t <= 250 mm | 200 | 290 |
| Flat products 150 < t <= 250 mm | 150 | 295 |
| Flat products 150 < t <= 250 mm | 100 | 300 |
| Flat products 150 < t <= 250 mm | 50 | 310 |
| Flat products 60 < t <= 150 mm | 450 | 205 |
| Flat products 60 < t <= 150 mm | 400 | 225 |
| Flat products 60 < t <= 150 mm | 350 | 255 |
| Flat products 60 < t <= 150 mm | 300 | 275 |
| Flat products 60 < t <= 150 mm | 250 | 285 |
| Flat products 60 < t <= 150 mm | 200 | 300 |
| Flat products 60 < t <= 150 mm | 150 | 305 |
| Flat products 60 < t <= 150 mm | 100 | 310 |
| Flat products 60 < t <= 150 mm | 50 | 320 |
| Flat products t <= 60 mm | 450 | 215 |
| Flat products t <= 60 mm | 400 | 235 |
| Flat products t <= 60 mm | 350 | 265 |
| Flat products t <= 60 mm | 300 | 285 |
| Flat products t <= 60 mm | 250 | 295 |
| Flat products t <= 60 mm | 200 | 310 |
| Flat products t <= 60 mm | 150 | 315 |
| Flat products t <= 60 mm | 100 | 320 |
| Flat products t <= 60 mm | 50 | 330 |
| Condition | Temperature ℃ | min | Remarks |
|---|---|---|---|
| Flat products quenched and tempered +QT t <= 250 mm ( transverse ) | -20 | 27 | KV; Min. impact energy values of 40J may be agreed. |
| Flat products normalized +N t <= 150 mm ( transverse ) | -20 | 27 | KV; Min. impact energy values of 40J may be agreed. |
Creep
| Temperature ℃ | Time h | Rp1 | CRS |
|---|---|---|---|
| 425 | 10000.0h | 392.0 | 421.0 |
| 425 | 100000.0h | 314.0 | 343.0 |
| 430 | 10000.0h | 383.0 | 407.0 |
| 430 | 100000.0h | 302.0 | 330.0 |
| 440 | 10000.0h | 360.0 | 380.0 |
| 440 | 100000.0h | 272.0 | 300.0 |
| 450 | 10000.0h | 333.0 | 353.0 |
| 450 | 100000.0h | 240.0 | 265.0 |
| 460 | 10000.0h | 303.0 | 325.0 |
| 460 | 100000.0h | 207.0 | 230.0 |
| 470 | 10000.0h | 271.0 | 295.0 |
| 470 | 100000.0h | 176.0 | 196.0 |
| 480 | 10000.0h | 239.0 | 263.0 |
| 480 | 100000.0h | 148.0 | 166.0 |
| 490 | 10000.0h | 207.0 | 229.0 |
| 490 | 100000.0h | 124.0 | 140.0 |
| 500 | 10000.0h | 177.0 | 196.0 |
| 500 | 100000.0h | 103.0 | 118.0 |
| 510 | 10000.0h | 150.0 | 165.0 |
| 510 | 100000.0h | 84.0 | 98.0 |
| 520 | 10000.0h | 127.0 | 141.0 |
| 520 | 100000.0h | 64.0 | 79.0 |
| 525 | 10000.0h | 118.0 | 132.0 |
| 525 | 100000.0h | 54.0 | 69.0 |
Heat treatment
| Type | 1 |
|---|---|
| Heat-treatment curve | CCT modified |
| Heat-treatment curve | CCT |
| Heat-treatment curve | TTT |