China · CGMA
17Cr2Ni2MoH
CGMA001-1:2004 — CGMA001-1
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionChemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| C | 0.15 | 0.19 | ||
| Cr | 1.5 | 1.8 | ||
| Cu | 0.2 | |||
| Mn | 0.4 | 0.6 | ||
| Mo | 0.25 | 0.35 | ||
| Ni | 1.4 | 1.7 | ||
| P | 0.03 | |||
| S | 0.015 | 0.035 | ||
| Si | 0.15 | 0.4 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| steel products | ≥63 | |||||
| steel products, normalized 910±10℃, quenched 830±10℃ | HR 30–37 End hardenability,J50;HR 34–41 End hardenability,J25;HR 39–46 End hardenability,J10;HR 41–47 End hardenability,J5 | |||||
| steel products, annealed or tempered | HB ≤217 |
Heat treatment
| Type | 3 | 4 |
|---|---|---|
| Heat-treatment process | Tempered | Heating temperature 200℃, water coolant, air |
| Heat-treatment process | Quenched | Heating temperature 870℃, oil coolant |
| Heat-treatment process | Normalized | Heating temperature 930℃ |