China · GB
Grade FH40
GB 712:2011 — Ship and ocean engineering structural steel
Chemical composition
wt% · log scale- min – max range
- typical value
Mechanical properties
value range by conditionHigh / low temperature
value vs. temperature- , 70 < t <= 150 mm ( transverse ) · Impact energy Kv/Ku
- , 70 < t <= 150 mm ( longitudinal ) · Impact energy Kv/Ku
- , 50 < t <= 70 mm ( transverse ) · Impact energy Kv/Ku
- , 50 < t <= 70 mm ( longitudinal ) · Impact energy Kv/Ku
Chemical composition
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 0.015 | Als (soluble aluminum) | ||
| C | 0.16 | |||
| Cr | 0.2 | |||
| Cu | 0.35 | |||
| Mn | 0.9 | 1.6 | ||
| Mo | 0.08 | |||
| N | 0.009 | |||
| Nb | 0.02 | 0.05 | ||
| Ni | 0.8 | |||
| P | 0.02 | |||
| S | 0.02 | |||
| Si | 0.5 | |||
| Ti | 0.02 | |||
| V | 0.05 | 0.1 |
Mechanical properties
| Heat treatment / condition | Yield strength | Tensile strength | Elongation | Reduction of area | Impact energy | Hardness |
|---|---|---|---|---|---|---|
| plates, sections, Heat treated | ≥390 | 510–660 | ≥20 | |||
| plates, sections, Heat treated, 50 < t <= 70 mm | ≥31 Charpy V Notch (0°C;≥46 Charpy V Notch (0°C | |||||
| plates, sections, Heat treated, 70 < t <= 150 mm | ≥37 Charpy V Notch (0°C;≥55 Charpy V Notch (0°C | |||||
| plates, sections, Heat treated, t <= 50 mm | ≥27 Charpy V Notch (0°C;≥41 Charpy V Notch (0°C |
High/low temperature
| Condition | Temperature ℃ | min | Remarks |
|---|---|---|---|
| , 70 < t <= 150 mm ( transverse ) | 0 | 37 | Charpy V Notch |
| , 70 < t <= 150 mm ( transverse ) | -20 | 37 | Charpy V Notch |
| , 70 < t <= 150 mm ( transverse ) | -40 | 37 | Charpy V Notch |
| , 70 < t <= 150 mm ( transverse ) | -60 | 37 | Charpy V Notch |
| , 70 < t <= 150 mm ( longitudinal ) | 0 | 55 | Charpy V Notch |
| , 70 < t <= 150 mm ( longitudinal ) | -20 | 55 | Charpy V Notch |
| , 70 < t <= 150 mm ( longitudinal ) | -40 | 55 | Charpy V Notch |
| , 70 < t <= 150 mm ( longitudinal ) | -60 | 55 | Charpy V Notch |
| , 50 < t <= 70 mm ( transverse ) | 0 | 31 | Charpy V Notch |
| , 50 < t <= 70 mm ( transverse ) | -20 | 31 | Charpy V Notch |
| , 50 < t <= 70 mm ( transverse ) | -40 | 31 | Charpy V Notch |
| , 50 < t <= 70 mm ( transverse ) | -60 | 31 | Charpy V Notch |
| , 50 < t <= 70 mm ( longitudinal ) | 0 | 46 | Charpy V Notch |
| , 50 < t <= 70 mm ( longitudinal ) | -20 | 46 | Charpy V Notch |
| , 50 < t <= 70 mm ( longitudinal ) | -40 | 46 | Charpy V Notch |
| , 50 < t <= 70 mm ( longitudinal ) | -60 | 46 | Charpy V Notch |
| , t <= 50mm ( transverse ) | 0 | 27 | Charpy V Notch |
| , t <= 50mm ( transverse ) | -20 | 27 | Charpy V Notch |
| , t <= 50mm ( transverse ) | -40 | 27 | Charpy V Notch |
| , t <= 50mm ( transverse ) | -60 | 27 | Charpy V Notch |
| , t <= 50mm ( longitudinal ) | 0 | 41 | Charpy V Notch |
| , t <= 50mm ( longitudinal ) | -20 | 41 | Charpy V Notch |
| , t <= 50mm ( longitudinal ) | -40 | 41 | Charpy V Notch |
| , t <= 50mm ( longitudinal ) | -60 | 41 | Charpy V Notch |