全球 · 企业标准
Aluminium 4104
--
化学成分
| 元素 | min | max | 相似 | 备注 |
|---|---|---|---|---|
| Al | Nominal value 98.9% | Nominal value 98.9% | ||
| Cr | 0.1 | |||
| Cu | 0.1 | |||
| Fe | 0.35 | |||
| Mg | 0.45 | 0.9 | Nominal value 0.7% | Nominal value 0.7% |
| Mn | 0.1 | |||
| Si | 0.2 | 0.6 | Nominal value 0.4% | Nominal value 0.4% |
| Ti | 0.1 | |||
| Total Each | 0.05 | |||
| Total oth. | 0.15 | |||
| Zn | 0.2 |
力学性能
| 热处理 / 状态 | 屈服强度 | 抗拉强度 | 伸长率 | 断面收缩率 | 冲击功 | 硬度 |
|---|---|---|---|---|---|---|
| 圆钢 Precipitation treated (05) t = 10 - 200 mm | ≥170 | ≥210 | ≥12 Lo = 5 mm; A=105 for Lo=10 mm; | HV 75–105 | ||
| 圆钢 加工 t = 100 - 200 mm | ≥60 | ≥120 | ≥18 Lo = 5 mm; A = 15% for Lo = 10 mm; | HV 40–70 | ||
| 圆钢 自然时效 t = 1.0 - 12.0 mm | ≥70 | ≥130 | ≥15 Lo = 5 mm; A=13% for Lo = 10 mm; | HV 45–75 | ||
| 圆钢 自然时效 t = 10 - 200 mm | ≥70 | ≥130 | ≥15 Lo = 5 mm; A=13% for Lo = 10 mm; | HV 45–75 | ||
| 圆钢 退火 t = 10 - 200 mm | ≥45 | ≥100 | ≥25 Lo = 5 mm; A=20% for Lo = 10mm; | HV 35–60 | ||
| 扁钢,圆管,方管,六角管 加工 t = 1.0 - 12.0 mm | ≥60 | ≥120 | ≥18 Lo = 5 mm; A=15% for Lo = 10 mm; | HV 40–70 | ||
| 扁钢,圆管,方管,六角管 退火 t = 1.0 - 12.0 mm | ≥45 | ≥100 | ≥25 Lo = 5 mm; A=20% for Lo = 10 mm; | HV 35–60 | ||
| 扁钢,正方形管和正六边形管,挤压成形型材, 沉淀处理 t = 1.0 - 12.0 mm | ≥170 | ≥210 | ≥12 For Lo = 5 mm; A=10% for Lo = 10 mm; | HV 75–105 | ||
| 正方形,六棱钢 加工 t = 10 - 165 mm | ≥60 | ≥120 | ≥18 Lo = 5 mm; A=15% for Lo=10mm; | HV 40–70 | ||
| 正方形,六棱钢 沉淀处理 t = 10 - 165 mm | ≥170 | ≥210 | ≥12 Lo = 5 mm; A=10% for Lo=10 mm; | HV 75–105 | ||
| 正方形,六棱钢 自然时效 t = 10 - 165 mm | ≥70 | ≥130 | ≥15 Lo = 5 mm; A=13% for Lo=10mm; | HV 45–75 | ||
| 正方形,六棱钢 退火 t = 10 - 165 mm | ≥45 | ≥100 | ≥25 Lo = 5 mm; A=20% for Lo = 10 mm; | HV 35–60 |