日本 · JIS

SB 480 M

JIS G3103:2012 — 锅炉及压力容器用碳素钢和钼合金钢板

化学成分

wt% · 对数刻度
0.00010.0010.010.1110B0.001C0.2Cr0.3Cu0.4Mn0.9Mo0.45 – 0.6Nb0.02Ni0.4P0.02S0.02Si0.15 – 0.4Ti0.03V0.03
  • min – max 范围
  • 典型值

力学性能

按热处理状态分组
屈服强度 Rp0.2≥275 MPa抗拉强度 Rm480–620 MPa伸长率 A≥17 %Plates  Heat treated  t <= 50 mm屈服强度 Rp0.2≥275 MPa抗拉强度 Rm480–620 MPa伸长率 A≥21 %Plates  Heat treated  t > 50 mm

化学成分

ElementminmaxSimilarRemarks
B0.001For product analysis: 0.0015% max
C0.2For t <= 25mm; For 25 < t <= 50mm
Cr0.3For product analysis: 0.34% max;
Cu0.4For product analysis: 0.43% max;
Mn0.9For product analysis: 0.98% max;
Mo0.450.6For product analysis: 0.41-0.64%;
Nb0.02For product analysis: 0.03% max; May be 0.05% or under for the heat and 0.06% or under for product analysis.
Ni0.4For product analysis: 0.43% max;
P0.02Applicable for heat and product analysis;
S0.02Applicable for heat and product analysis;
Si0.150.4For product analysis: 0.13-0.45%;
Ti0.03For product analysis: 0.04% max; May be 0.05% for both analysis.
V0.03For product analysis: 0.04% max; May be 0.10% or under for the heat and 0.11% or under for product analysis.

力学性能

热处理 / 状态屈服强度抗拉强度伸长率断面收缩率冲击功硬度
Plates  Heat treated  t <= 50 mm≥275480–620≥17 Test piece No.1A; For t < 8mm
Plates  Heat treated  t > 50 mm≥275480–620≥21 Test piece No.10; For t > 90mm