法国 · AFNOR NF
C 18 D 2
NF EN 10016-4 — 非合金钢棒杆的拉拔和/或冷轧 - 第4部分:为特殊应用特殊要求
化学成分
wt% · 对数刻度- min – max 范围
- 典型值
化学成分
| Element | min | max | Similar | Remarks |
|---|---|---|---|---|
| Al | 0.01 | By agreement | ||
| C | 0.16 | 0.2 | ||
| Cr | 0.1 | |||
| Cu | 0.15 | For certain applications Cu=max0 | ||
| Cu+Ni+Cr | 0.3 | |||
| Cu+Sn | 0.15 | |||
| Mn | 0.3 | 0.5 | The manganese content may be agreed with a maximum not exceeding 1 | |
| Mo | 0.05 | |||
| N | 0.007 | If the Al content is fixed at 0 | ||
| Ni | 0.1 | |||
| P | 0.02 | |||
| S | 0.025 | |||
| Si | 0.3 | For rod intended for galvanizing |