西班牙 · UNE

1.4306

UNE EN 10028-7 — 压力平板钢产品-第7部分:不锈钢

化学成分

wt% · 对数刻度
0.0010.010.1110100C0.03Cr18 – 20Mn2N0.1Ni10 – 12P0.045S0.015Si1
  • min – max 范围
  • 典型值

力学性能

按热处理状态分组
屈服强度 Rp0.2≥220 MPa抗拉强度 Rm520–700 MPa冲击功 Kv/Ku≥60 J伸长率 A≥45 %冷轧钢带  Solution annealed  <= 8 mm  (横向)冲击功 Kv/Ku≥100 J冷轧钢带  Solution annealed    (纵向)冲击功 Kv/Ku≤60 J厚板, 钢带  Solution annealed屈服强度 Rp0.2≥200 MPa抗拉强度 Rm500–700 MPa冲击功 Kv/Ku≥60 J伸长率 A≥45 %热轧厚板  Solution annealed  <= 75 mm  (横向)

物理性能

随温度变化
弹性模量 GPa
165 – 200°C
平均热膨胀系数 10⁻⁶/K
16.0 – 18.0°C

疲劳 S-N 曲线

应力 vs. 循环次数(对数)
96.6139182224266110循环次数
  • 1.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 600°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20
  • 2.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 23°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20
  • 3.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 23°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20
  • 4.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 600°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20; Specimen location: in welding direction; 方向: L
  • 5.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 600°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20; Specimen location: in welding direction; 方向: L
  • 6.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 600°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20

化学成分

ElementminmaxSimilarRemarks
C0.03
Cr1820
Mn2
N0.1
Ni1012
P0.045
S0.015
Si1

力学性能

热处理 / 状态屈服强度抗拉强度伸长率断面收缩率冲击功硬度
冷轧钢带  Solution annealed  <= 8 mm  (横向)≥220520–700≥45 For thickness >= 3 mm≥60 KV (ISO-V) (20°C)
冷轧钢带  Solution annealed    (纵向)≥100 KV (ISO-V) (20°C) long.
厚板, 钢带  Solution annealed≤60
热轧厚板  Solution annealed  <= 75 mm  (横向)≥200500–700≥45 For thickness < 3 mm≥60 KV (ISO-V) (20°C)
热轧厚板  Solution annealed    (纵向)≥100 KV (ISO-V) (20°C)
热轧钢带  Solution annealed  <= 13.5 mm  (横向)≥200520–700≥45 For thickness >= 3 mm≥60 KV (ISO-V) (20°C)
热轧钢带  Solution annealed    (纵向)≥100 KV (ISO-V) (20°C) long.

物理性能

20.0

弹性模量平均热膨胀系数热导率比热容电阻率密度泊松比
200.0015.00500.000.737.90

典型物理值

密度弹性模量泊松比备注
7.61–8.10190.00–215.000.27–0.30不锈钢的典型材料性能数值,此值不来源于标准,它是指示性指标,不能被用于设计用途。
7.86190.00–210.000.27–0.30低碳,高合金钢材料性能属性数值,此值不来源于标准,它是指示性指标,不能被用于设计用途。

高/低温力学性能

屈服强度 Rp0.2 (MPa)
热处理 / 状态温度 ℃min备注
厚板钢带  Solution annealed55080.00
厚板钢带  Solution annealed50081.00
厚板钢带  Solution annealed45085.00
厚板钢带  Solution annealed40089.00
厚板钢带  Solution annealed35094.00
厚板钢带  Solution annealed300100.00
厚板钢带  Solution annealed250108.00
厚板钢带  Solution annealed200118.00
厚板钢带  Solution annealed150132.00
厚板钢带  Solution annealed100147.00
厚板钢带  Solution annealed50180.00
抗拉强度 Rm (MPa)
热处理 / 状态温度 ℃min备注
厚板钢带  Solution annealed350340.00
厚板钢带  Solution annealed300340.00
厚板钢带  Solution annealed250350.00
厚板钢带  Solution annealed200360.00
厚板钢带  Solution annealed150380.00
厚板钢带  Solution annealed100410.00
厚板钢带  Solution annealed50466.00
冲击功 Kv/Ku (J)
热处理 / 状态温度 ℃minmax
厚板钢带  Solution annealed-19660

疲劳性能

1.Plates; 20 mm thick; Welded; Total strain control; R=-1; T: 600°C; Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 20

试验条件
项目内容
ProductPlates; 20 mm thick; Welded
ExperimentTotal strain control; R=-1; T: 600°C
SpecimenCylindrical; Diameter [mm]: 14; Gauge length [mm]: 20
单调性能
指标数值
弹性模量(GPa)157.0
应变寿命
序号循环屈服强度 (MPa)循环应变硬化指数 n′循环强度系数 K′ (MPa)疲劳强度系数 σ′f (MPa)疲劳强度指数 b疲劳延性系数 ε′f疲劳延性指数 c
12340.1020440382-0.07100.3170-0.7434
应力寿命
序号试样应力 (MPa)循环次数
1Cylindrical; Diameter [mm]: 14; Gauge length [mm]: 201372E6

相似牌号

牌号地区标准体系
1.4306意大利UNI
X 2 CrNi 19 11意大利UNI
X 2 CrNi 19 11西班牙UNE
1.4306罗马尼亚STAS
X 2 CrNi 19 11罗马尼亚STAS
1.4306瑞典SS
X 2 CrNi 19 11瑞典SS
1.4306瑞士SNV
X 2 CrNi 19 11瑞士SNV
1.4306芬兰SFS
X 2 CrNi 19 11芬兰SFS
1.4306波兰PN
X 2 CrNi 19 11波兰PN
1.4306奥地利ONORM
X 2 CrNi 19 11奥地利ONORM
1.4306挪威NS
X 2 CrNi 19 11挪威NS
1.4306比利时NBN
X 2 CrNi 19 11比利时NBN
1.4306匈牙利MSZ
X 2 CrNi 19 11匈牙利MSZ
1.4306捷克CSN
X 2 CrNi 19 11捷克CSN
1.4306保加利亚BDS
X 2 CrNi 19 11保加利亚BDS
1.4306英国B.S.
X 2 CrNi 19 11英国B.S.
1.4306法国AFNOR NF
X 2 CrNi 19 11法国AFNOR NF
X 2 CrNi 19 11德国DIN
1.4306德国DIN